OE 03L141015A products
AUDI: 03L 141 015 A
SEAT: 03L 141 015 A
SKODA: 03L 141 015 A
VAG: 03L 141 015A
VW: 03L141015A
VW: 03L 141 015 A
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Outer Diameter | 241mm |
| Number of Teeth | 26 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | with synthetic grease |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$106.90
$125.70
-15%
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Parts | 3-part |
| Number of Teeth | 23 |
| Hub Profile | 24.2 x 21.8 |
$154.80
$182.20
-16%
| Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with synthetic grease, with central slave cylinder |
| for OE No. | 03G 141 015 L S1 |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$157.80
$185.60
-15%
| Multi-piece | two-piece |
| Number of Teeth | 26 |
| Hub Profile | 26.6x28.9 |
| Supplementary Article/Supplementary Info | without central slave cylinder, with clutch pressure plate, with synthetic grease |
| Adjustment | without automatic adjustment |
| Supplementary Article/Supplementary Info 2 | with clutch disc |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| More information » | |
| Ø | 240mm |
| Hub Profile | 26, 5x28, 7-26N |
| Number of Teeth | 26 |
| only available in set | |
| Supplementary Article/Supplementary Info 2 | without clutch release bearing |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Multi-piece | three-piece |
| Number of Teeth | 26 |
| Hub Profile | 26.6x28.9 |
| Supplementary Article/Supplementary Info | with central slave cylinder, with clutch pressure plate, with synthetic grease |
| Adjustment | without automatic adjustment |
| Supplementary Article/Supplementary Info 2 | with clutch disc |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Friction Lining Outer Diameter 1 | 240mm |
| More information » | |
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| for flywheel manufacturer | SACHS |
| Weight | 6.44kg |
| Ø | 240mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| SVHC | No SVHC present! |
$253.10
$297.70
-15%
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Hub Profile | 28, 7 x 26, 5 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 29mm |
| Material | Plastic |
| Supplementary Article/Supplementary Info 2 | without sensor |
| Overall Length | 63.1mm |
| for flywheel manufacturer | SACHS |
| Weight | 6.15kg |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 