OE 04E121600CS products
AUDI: 04E 121 600CS
AUDI: 04E121600CS
AUDI: 04E 121 600 CS
AUDI: 04E121600CS+
CUPRA: 04E121600CS
CUPRA: 04E 121 600 CS
CUPRA: 04E 121 600CS
SEAT: 04E 121 600CS
SEAT: 04E 121 600 CS
SEAT: 04E121600CS
SEAT: 04E121600CS+
SKODA: 04E 121 600CS
SKODA: 04E 121 600 CS
SKODA: 04E121600CS
SKODA: 04E121600CS+
VAG: 04E121600CS
VAG: 04E 121 600 CS
VAG: 04E121600CS+
VAG: 04E 121 600CS
VW: 04E 121 600CS
VW: 04E121600CS
VW: 04E 121 600 CS
VW: 04E121600CS+
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Supplementary Article/Supplementary Info | without gasket/seal |
| Opening Temperature | 80°C |
$5.90
$7.00
-16%
| Housing Type | without housing |
| Weight | 0.94kg |
| Overall Height | 60mm |
| Number of Teeth | 28 |
| for OE No. | 04E121600CS |
| Operating Mode | mechanical |
| Number of Teeth | 163 |
| Number of belts | 1 |
| Number of track rollers | 2 |
| Width 1 | 20mm |
| Operating Mode | mechanical |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Supplementary Article/Supplementary Info 2 | with thermal management module, with bore for sensor, Thermostat fitted in water pump |
| Housing Type | Synthetic Material Housing |
| Pulleys | with belt pulley |
| Supplementary Article/Supplementary Info 2 | without cover |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Number of Teeth | 28 |
| Water Pump Pulley Ø | 43Inch |
| Weight | 1.12kg |
| Observe service information | |
| Number of blades/vanes | 6 |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Number of Teeth | 28 |
| Number of Teeth | 87 |
| Width 1 | 10mm |
| Weight | 1.154kg |
| Packaging length | 20cm |
| Packaging width | 15cm |
| Packaging height | 22.5cm |
| Supplementary Article/Supplementary Info | with gasket/seal |
| Operating Mode | mechanical |
| Housing Type | without housing |
| More information » | |
$54.00
$63.50
-15%
| Length | 250mm |
| Width | 170mm |
| Height | 125mm |
| Weight | 1.52kg |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Water Pump Type | for timing belt driven power take-off drive |
| Belt Width | 10mm |
| for OE No. | 04E 121 605 E |
| Number of Teeth | 87 |
| Packaging length | 23.5cm |
| Packaging width | 19.5cm |
| Packaging height | 20.9cm |
| Number of Teeth | 81 |
| Weight | 1.414kg |
| Width | 10mm |
| Housing Type | without housing |
| More information » | |
$61.30
$72.10
-15%
| Packaging length | 23.5cm |
| Packaging width | 19.5cm |
| Packaging height | 20.9cm |
| Number of Teeth | 87 |
| Weight | 1.374kg |
| Width 1 | 10mm |
| Housing Type | without housing |
| More information » | |
$65.30
$76.90
-16%
| Number of Teeth | 81 |
| Width | 10mm |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Water Pump Type | for timing belt driven power take-off drive |
| Water pump impeller material | Plastic |
| Belt Width | 10mm |
| for OE No. | 04E 121 605 L |
| Number of Teeth | 81 |
| Pulleys | with belt pulley |
| Housing Type | with housing |
| Water Pump Type | for timing belt drive |
| Supplementary Article/Supplementary Info 2 | with thermostat |
| Supplementary Article/Supplementary Info | with gasket/seal |
$69.60
$81.80
-15%
| New Part | |
| Used part return not required | |
| Observe system fill quantity |
| Width 1 | 20mm |
| Width 2 | 10mm |
| Number of Teeth 1 | 163 |
| Number of Teeth 2 | 81 |
| Number of Teeth 1 | 81 |
| Width 1 | 10mm |
| Supplementary Article/Supplementary Info 2 | with cover, Thermostat fitted in water pump |
| Number of Teeth | 28 |
| Supplementary Article/Supplementary Info | with gasket/seal, do not use sealant |
| Supplementary Article/Supplementary Info 2 | with cover, Thermostat fitted in water pump |
| Number of blades/vanes | 6 |
| Water Pump Pulley Ø | 43.4mm |
| Impeller Ø | 63mm |
| Water pump impeller material | Metal |
| More information » | |
| Width | 10mm, 20mm |
| Belt Material | PTFE (polytetrafluoroethylene) |
| Number of Teeth | 163, 81 |
| Number of Teeth 2 | 81 |
| Width 2 | 10mm |
| Number of track rollers | 2 |
| Number of belts | 2 |
| Width 1 | 20mm |
| Number of Teeth | 163 |
| Supplementary Article/Supplementary Info | with gaskets/seals |
| Number of bolts/screws | 1 |
| Water pump impeller material | Metal |
| Number of Teeth 1 | 163 |
| Number of Teeth 2 | 87 |
| Width 1 | 20.1mm |
| Width 2 | 10mm |
| More information » | |
| Width 1 | 20mm |
| Width 2 | 10mm |
| Number of Teeth 1 | 163 |
| Number of Teeth 2 | 87 |
| Number of track rollers | 2 |
| Number of belts | 2 |
| Number of Teeth | 163 |
| Width 1 | 20mm |
| Number of Teeth 2 | 87 |
| Width 2 | 10mm |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
