OE 0532T4 products
CITROËN: 0532T4
CITROËN: 0532.T4
CITROËN: 0532-T4
CITROËN: 0532 T4
DS: 0532.T4
DS: 0532 T4
PEUGEOT: 0532T4
PEUGEOT: 0532.T4
PEUGEOT: 0532 T4
PEUGEOT: 0532-T4
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Outer Diameter | 240mm |
| Supplementary Article/Supplementary Info | with flywheel screws |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| Number of mounting bores | 6 |
| SVHC | No SVHC present! |
$321.60
$378.30
-15%
| Number of Teeth | 26 |
| Ø | 240mm |
| Number of mounting bores | 6 |
| New Part | |
| Supplementary Article/Supplementary Info | with single-mass flywheel, with central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch |
| Tightening Torque | 60Nm |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Hub Profile | 22 x 20 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 24mm |
| Material | Plastic |
| Supplementary Article/Supplementary Info 2 | Special tools for mounting not necessary |
| Weight | 17.22kg |
| More information » | |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Supplementary Article/Supplementary Info 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Number of mounting bores | 6 |
| SVHC | No SVHC present! |
$434.50
$511.10
-15%
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Clutch Pressure Plate Outer Diameter | 235mm |
| Number of Teeth | 26 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 24mm |
| Material | Plastic |
| Supplementary Article/Supplementary Info 2 | with sensor |
| Weight | 18.26kg |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with single-mass flywheel, without central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch |
| Tightening Torque | 60Nm |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Hub Profile | 22 x 20 |
| Weight | 16.22kg |
| Supplementary Article/Supplementary Info 2 | Special tools for mounting not necessary |
| More information » | |
| Hub Profile | 20, 05x21, 56 |
| Number of Teeth | 26 |
| Ø | 235mm |
| Extention Force | 6, 700N |
| Number of mounting bores | 6 |
| Number of mounting bores at central slave cylinder | 3 |
| Ø | 235mm |
| Number of Teeth | 26 |
| Mounting Type | not pre-assembled |
| Supplementary Article/Supplementary Info | with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws |
| only available in set | |
| Supplementary Article/Supplementary Info 2 | with clutch disc |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Supplementary Article/Supplementary Info 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Number of mounting bores | 6 |
| SVHC | No SVHC present! |
$472.80
$556.30
-16%
| Ø | 235mm |
| Number of Teeth | 26 |
| Mounting Type | not pre-assembled |
| Supplementary Article/Supplementary Info | with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws |
| only available in set | |
| Supplementary Article/Supplementary Info 2 | with clutch disc |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Ø | 236mm |
| Supplementary Article/Supplementary Info | with central slave cylinder, with dual-mass flywheel |
| Hub Profile | 26 |
| Net weight | 17.44kg |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
