OE 077906262C products
AUDI: 077 906 262C
AUDI: 077 906 262 C
AUDI: 077906262C
AUDI: 077-906-262C
FIAT: 077906262C
SEAT: 077 906 262C
SEAT: 077906262C
SEAT: 077 906 262 C
SEAT: 077-906-262C
SKODA: 077 906 262C
SKODA: 077906262C
SKODA: 077 906 262 C
VAG: 077 906 262C
VAG: 077906262C
VAG: 077 906 262 C
VW: 077 906 262 C
VW: 077906262C
VW: 077 906 262C
VW: 077-906-262C
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Oxygen Sensor | Regulating Sensor, Thread pre-greased |
| Fitting Position | before catalytic converter |
| Number of circuits | 4 |
| Number of circuits | 4 |
| Overall Length | 1, 050mm |
| Oxygen Sensor | Heated |
| Connector Shape | oval |
| Number of connectors | 4 |
| Thread Size | M18x1, 5 |
| Line insulation design | with silicone-coated woven-fibre insulation |
| More information » | |
| Oxygen Sensor | Heated |
| Overall Length | 1, 760mm |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Voltage | 12V |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Cable Length | 1, 750mm |
| Number of circuits | 4 |
| Cable Length | 1, 200mm |
| Number of circuits | 4 |
| Oxygen Sensor | Diagnostic Probe |
| Oxygen Sensor | Heated |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| for OE No. | 3921022610 |
| Quality | Zr planar, OE EQUIVALENT |
| Conductor Number | 636conductor |
$33.30
$39.20
-16%
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Cable Length | 1, 050mm |
| Number of circuits | 4 |
| Resistor | 9Ohm |
| Conductor Number | 4conductor |
| Length | 1, 731mm |
| Cable Length | 1, 731mm |
| Oxygen Sensor | Heated |
$38.60
$45.40
-15%
| Oxygen Sensor | Heated |
| Voltage | 12V |
| Weight | 0.09kg |
| Operating Mode | Electric |
| Guarantee | 3 years guarantee |
| Always compare old and new part (in particular OE No.) | |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | DENSO |
| Weight | 93g |
| Gross Weight | 140g |
| More information » | |
| for OE No. | 3921022610 |
| Quality | Zr planar, OE EQUIVALENT |
| Conductor Number | 636conductor |
| Oxygen Sensor | Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 1, 525mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 06A906262AQ |
| Quality | DENSO |
| Weight | 117g |
| Gross Weight | 150g |
| More information » | |
| Oxygen Sensor | Regulating Sensor |
| Length | 1, 700mm |
| Number of pins | 4-pin connector |
| Supplementary Article/Supplementary Info 2 | with mounting manual |
| only for article number | 77032 |
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 1, 750mm |
| Number of pins | 4-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Number of circuits | 4 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Heated |
| Number of pins | 4-pin connector |
| Guarantee | 5 years guarantee or up to 75, 000km |
| Fitting Position | before catalytic converter, after catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 1, 800mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | oval |
| Weight | 0.23kg |
| More information » | |
| for OE No. | 46751082 |
| Quality | OE EQUIVALENT, Zr planar |
| Conductor Number | 636conductor |
$86.00
$101.20
-16%
| Number of circuits | 4 |
| Overall Length | 1, 760mm |
| Available as universal article as well, see article no. | 0 258 986 615 |
| Recommended change interval | 160, 000km |
| Connector/Clamp | Connector may need adjustment |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
