OE 10491104 products
MG: 10491104
MG (SAIC): 10491104
ROEWE (SAIC): 10491104
SAIC MOTOR: 10491104
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Fitting Position | Rear Axle |
| Height | 36.4mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 12mm |
| Material | Cast Iron |
| Processing | Untreated |
| Outer Diameter | 304mm |
| Centering Diameter | 65mm |
| Bolt Hole Circle Ø | 112mm |
| Surface | Uncoated |
| More information » | |
| Brake Disc Thickness | 12mm |
| Rim | 5-Hole |
| Number of mounting bores | 1 |
| Thickness | 37mm |
| Outer Diameter | 304mm |
| Bolt Hole Circle Ø | 112mm |
| Surface | Coated |
| Brake Disc Type | solid |
| Fitting Position | Rear Axle |
| Min. thickness | 10mm |
| Centering Diameter | 65mm |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$33.60
$39.50
-15%
Sold in pairs
| Brake Disc Thickness | 12mm |
| Rim | 5-Hole |
| Number of mounting bores | 1 |
| Thickness | 37mm |
| Outer Diameter | 304mm |
| Bolt Hole Circle Ø | 112mm |
| Surface | Coated |
| Brake Disc Type | solid |
| Fitting Position | Rear Axle |
| Min. thickness | 10mm |
| Centering Diameter | 65mm |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$34.30
$40.40
-16%
Sold in pairs
| Brake Disc Type | solid |
| Num. of holes | 9 |
| Appr. stamp | R90 Homologated |
| Surface | Coated |
| Outer Diameter | 304mm |
| Brake Disc Thickness | 12mm |
| Bolt Hole Circle Ø | 112mm |
| Centering Diameter | 65mm |
| Height | 36.2mm |
| More information » | |
| Fitting Position | Front Axle |
| Brake Disc Type | solid |
| Outer Diameter | 304mm |
| Brake Disc Thickness | 12mm |
| Height | 36.2mm |
| Num. of holes | 9 |
| Min. thickness | 10mm |
| Centering Diameter | 65mm |
| Surface | painted |
| More information » | |
| Brake Disc Type | solid |
| Brake Disc Thickness | 12mm |
| Num. of holes | 9 |
| Height | 36.2mm |
| Centering Diameter | 65mm |
| Outer Diameter | 304mm |
| Processing | High-carbon |
| Surface | Coated |
| Min. thickness | 10mm |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
