OE 1804546 products
FORD: 1804546
FORD: 1 804 546
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Outer Diameter | 241mm |
| Number of Teeth | 20 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | with synthetic grease |
| Weight | 5.814kg |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Observe service information | |
| More information » | |
$108,30
$127,40
-15%
ADD TO BASKET
| Ø | 240mm |
| Number of Teeth | 20 |
| only available in set | |
| Supplementary Article/Info 2 | without clutch release bearing |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
$126,40
$148,70
-15%
ADD TO BASKET
| Ø | 240mm |
| Hub Profile | 22, 6 x 20 |
| Supplementary Article/Supplementary Info | with clutch pressure plate |
| Supplementary Article/Info 2 | with clutch disc |
$130,50
$153,50
-15%
ADD TO BASKET
| Engine Features/Arrangement | for engines with dual-mass flywheel |
| Number of Parts | 2-part |
| Hub Profile | 22.7 x 20.2 |
| Number of Teeth | 20 |
| Outer Diameter | 240mm |
$134,10
$157,80
-16%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 20 |
| Hub Profile | 24 x 20 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| Weight | 5.55kg |
$137,00
$161,20
-16%
ADD TO BASKET
| Ø | 240mm |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
$179,50
$211,20
-16%
ADD TO BASKET
| Supplementary Article/Info 2 | without clutch release bearing |
| Number of Teeth | 20 |
| Outer Diameter | 240mm |
| Bolt Hole Circle Ø | 258mm |
| Multi-piece | two-piece |
$182,70
$215,00
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Teeth | 20 |
$186,80
$219,80
-16%
ADD TO BASKET
| Ø | 240mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
$234,00
$275,30
-16%
ADD TO BASKET
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with central slave cylinder |
| Number of mounting bores | 6 |
| Supplementary Article/Info 2 | with screw set, with lock screw set, without sensor |
| Tightening Torque | 30Nm |
| Tightening degree | 90° |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 20 |
| Number of mounting bores at central slave cylinder | 2 |
| Bore Ø | 28mm |
| Material | Plastic |
| Mounting Type | Clipped |
| Weight | 19.8kg |
| More information » | |
$380,60
$447,80
-16%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder, with pilot bearing |
| Supplementary Article/Info 2 | with flywheel, with screw set |
| Adjustment | with automatic adjustment |
| Number of mounting bores | 6 |
| SVHC | No SVHC present! |
$411,60
$484,20
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
