OE 2052Q2 products
CITROËN: 2052.Q2
CITROËN: 2052Q2
CITROËN: 2052 Q2
CITROËN: 2052-Q2
CITROËN/PEUGEOT: 2052.Q2
DS: 2052Q2
OPEL: 2052Q2
PEUGEOT: 2052.Q2
PEUGEOT: 2052Q2
PEUGEOT: 2052 Q2
PEUGEOT: 2052-Q2
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Ø | 228mm |
| Supplementary Article/Supplementary Info 2 | without bearing |
| Net weight | 4.63kg |
| Number of Teeth | 26 |
| Ø | 235mm |
| Ø | 230mm |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
$125.00
$147.00
-15%
| Ø | 235mm |
| Number of Teeth | 26 |
| only available in set | |
| Supplementary Article/Supplementary Info 2 | without clutch release bearing |
| Warranty | 3 years warranty |
| Observe service information | |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Multi-piece | three-piece |
| Number of Teeth | 26 |
| Hub Profile | 20.5x21.9 |
| Supplementary Article/Supplementary Info | with central slave cylinder, with clutch pressure plate, with synthetic grease |
| Adjustment | with automatic adjustment |
| Supplementary Article/Supplementary Info 2 | with clutch disc |
| Clutch Pressure Plate Outer Diameter | 235mm |
| Friction Lining Outer Diameter 1 | 228mm |
| More information » | |
| Ø | 230mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
$166.10
$195.50
-16%
| Ø | 230mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Net weight | 5.81kg |
| Ø | 235mm |
| Number of Teeth | 26 |
| Alternative Repair Kit | 3000 970 129 |
| Fill Medium | Brake Fluid |
| only available in set | |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Ø | 230mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Adjustment | with automatic adjustment |
| SVHC | No SVHC present! |
$197.70
$232.50
-15%
| Ø | 235mm |
| Number of Teeth | 26 |
| Supplementary Article/Supplementary Info | with clutch pressure plate, with central slave cylinder, with dual-mass flywheel |
| Supplementary Article/Supplementary Info 2 | with clutch disc, with screw set |
| Mounting Type | not pre-assembled |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Clutch Pressure Plate Outer Diameter | 235mm |
| Number of Teeth | 26 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 24mm |
| Material | Plastic |
| Supplementary Article/Supplementary Info 2 | with sensor |
| Weight | 18.66kg |
| More information » | |
| Ø | 235mm |
| Number of Teeth | 26 |
| Supplementary Article/Supplementary Info | with clutch pressure plate, with central slave cylinder, with dual-mass flywheel |
| Supplementary Article/Supplementary Info 2 | with clutch disc, with screw set |
| Mounting Type | not pre-assembled |
| Warranty | 3 years warranty |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Clutch Pressure Plate Outer Diameter | 271mm |
| Number of Teeth | 26 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 24mm |
| Material | Plastic |
| Supplementary Article/Supplementary Info 2 | without sensor |
| Weight | 18.67kg |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 