OE 311103C510 products
HYUNDAI: 311103C510*
HYUNDAI: 31110-3C510*
HYUNDAI: 311103C510
KIA: 31110-3C510
KIA: 311103C510
KIA: 311103C510*
KIA: 31110-3C510*
TATA: 311103C510
TATA: 311103C510*
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Voltage | 12V |
| Fitting Position | in the fuel tank |
| Ø | 38mm |
| Weight | 0.34kg |
| D1 | 9mm |
| D2 | 11mm |
| Operating Pressure | 3.5bar |
| Operating Mode | Electric |
| Number of inlets/outlets | 1/1 |
| Flow rate | 90l/h |
| Length 1 | 73mm |
| Length 2 | 114mm |
| Injection System | Multi Point Injection (MPI) |
| Number of connectors | 2 |
| More information » | |
| for OE No. | 3111137300 |
| Pressure [bar] | 3.5bar |
| Operating Mode | Electric |
| Flow rate | 90l/h |
| Injection System | Multi Point Injection (MPI) |
$13.00
$15.30
-16%
| Voltage | 12V |
| Fitting Position | in the fuel tank |
| Ø | 38mm |
| Weight | 0.34kg |
| D1 | 9mm |
| D2 | 11mm |
| Operating Pressure | 3.5bar |
| Operating Mode | Electric |
| Number of inlets/outlets | 1/1 |
| Flow rate | 90l/h |
| Length 1 | 73mm |
| Length 2 | 114mm |
| Injection System | Multi Point Injection (MPI) |
| Supplementary Article/Supplementary Info 2 | with filter |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
| Voltage | 12V |
| Fitting Position | in the fuel tank |
| Ø | 38mm |
| Weight | 0.34kg |
| D1 | 9mm |
| D2 | 11mm |
| Operating Pressure | 3.5bar |
| Operating Mode | Electric |
| Number of inlets/outlets | 1/1 |
| Flow rate | 90l/h |
| Length 1 | 73mm |
| Length 2 | 114mm |
| Injection System | Multi Point Injection (MPI) |
| Supplementary Article/Supplementary Info 2 | with filter |
| Guarantee | 4 years guarantee |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
| for OE No. | 3111137300 |
| Pressure [bar] | 3.5bar |
| Operating Mode | Electric |
| Flow rate | 90l/h |
| Injection System | Multi Point Injection (MPI) |
| Operating Mode | Electric |
| Fuel Type | Petrol |
| Supplementary Article/Supplementary Info 2 | without pressure sensor |
| Supplementary Article/Supplementary Info | without gasket/seal |
| Housing material | Metal |
| Length | 116mm |
| Voltage | 12V |
| Ø | 38.5mm |
| Pressure [bar] | 3.8bar |
| Number of pins | 2-pin connector |
| Inner length | 113.5mm |
| Flow rate | 100l/h |
| Power consumption | 78W |
| Pressure pipe connector Ø | 8.8mm |
| Operating Mode | Electric |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
