OE 352037 products
CHEVROLET: 352037
CITROËN: 352037
CITROËN: 3520.37
CITROËN/PEUGEOT: 3520.37
CITROËN/PEUGEOT: 352037
GENERAL MOTORS: 352037
HINO: 352037
OPEL: 3 52 037
OPEL: 352037
PEUGEOT: 352037
PEUGEOT: 3520.37
PEUGEOT: 3520 37
VAUXHALL: 352037
VAUXHALL: 3 52 037
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Fitting Position | Front Axle |
| Thread Size | M18 |
| Width | 80mm |
| Height | 82mm |
| Cone Size | 18mm |
| Material | Steel |
| Weight | 0.42kg |
| Length | 91mm |
| More information » | |
| Control/Trailing Arm Type | Control Arm |
| Quantity required | 1 |
| Supplementary Article/Supplementary Info 2 | with ball joint |
| paired article number | SS1348 |
| for OE No. | 5352029 |
$26.40
$31.00
-15%
| Control/Trailing Arm Type | Control Arm |
| Fitting Position | Lower, Front Axle Left |
| Weight | 3.64kg |
| Cone Size | 18mm |
| Material | Sheet Steel |
| Supplementary Article/Supplementary Info 2 | with rubber mount |
| Control/Trailing Arm Type | Control Arm |
| Fitting Position | Lower, Front Axle Left |
| Weight | 3.64kg |
| Packaging Depth | 51.5cm |
| Cone Size | 18mm |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Supplementary Info | with bushing |
| Supplementary Article/Supplementary Info 2 | with ball joint |
| Cone Size | 18mm |
| paired article number | S060665 |
| Fitting Position | Left, Front Axle, Front Axle Left |
| Length | 332mm |
| Width | 401mm |
| Cone Size | 18mm |
| Material | Steel |
| Control/Trailing Arm Type | Control Arm |
| Bolt Ø | 18mm |
| Supplementary Article/Supplementary Info 2 | with ball joint |
| paired article number | FT15516 |
| More information » | |
| Fitting Position | Lower, Front Axle Left |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Supplementary Info 2 | with ball joint |
| Fitting Position | Front Axle Right, Front Axle Left |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Supplementary Info 2 | with rubber mount, with ball joint |
| replacement in pairs recommended | |
| Quantity required | 2 |
| Fitting Position | Front Axle Left |
| Control/Trailing Arm Type | Control Arm |
| Fitting Position | Left |
| Control/Trailing Arm Type | Control Arm |
| paired article number | 49399021 |
| Control/Trailing Arm Type | Control Arm |
| Quantity required | 1 |
| Supplementary Article/Supplementary Info 2 | with ball joint, with rubber mount |
| paired article number | L24527 |
| Weight | 3.15kg |
| Packaging length | 40cm |
| Packaging width | 39cm |
| Packaging height | 8cm |
| More information » | |
| Control/Trailing Arm Type | Control Arm |
| Fitting Position | Lower, Front Axle Left |
| paired article number | V40-1276 |
| article number of the recommended special tool | V99-1020 |
| Axle alignment required after fitting | |
| Material | Sheet Steel |
| Fitting Position | Front Axle Left, Lower |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Supplementary Info 2 | with ball joint, with rubber mount |
| Material | Sheet Steel |
| replacement in pairs recommended | |
| Quantity required | 1 |
| paired article number | 616 050 0020 |
| More information » | |
| Fitting Position | Front Axle Left |
| Control/Trailing Arm Type | Control Arm |
| Thread Size | M18 |
| Length | 380mm |
| Width | 96mm |
| Cone Size | 18mm |
| Material | Sheet Steel |
| paired article number | KSC4157 |
| Weight | 3.806kg |
| Height | 238mm |
| More information » | |
| Fitting Position | Front Axle Left, Lower |
| Control/Trailing Arm Type | Control Arm |
| Supplementary Article/Supplementary Info 2 | with rubber mount, with ball joint |
| Material | Sheet Steel |
| Replace in pairs only | |
| reinforced version | |
| Quantity required | 1 |
| Guarantee | 4 years guarantee |
| paired article number | 616 050 0020/HD |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
