OE 3L141015J products
AUDI: 3L141015J
SEAT: 3L 141 015 J
SEAT: 3L141015J
VW: 3L 141 015 J
VW: 3L141015J
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Engine Features/Arrangement | for engines with dual-mass flywheel |
| Number of Parts | 2-part |
| Number of Teeth | 26 |
| Hub Profile | 28.9 x 26.6 |
| Outer Diameter | 240mm |
$161.60
$190.20
-16%
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Hub Profile | 28, 6 x 26, 4 |
| Supplementary Article/Supplementary Info 2 | without clutch release bearing, Special tools for mounting not necessary |
| Clutch | for vehicles with push type clutch |
| for flywheel manufacturer | LUK |
| Weight | 5.535kg |
| More information » | |
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Hub Profile | 28, 6 x 26, 4 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Clutch | for vehicles with push type clutch |
| for flywheel manufacturer | LUK |
| Weight | 5.94kg |
| More information » | |
| Transmission Type | Manual Transmission |
| Number of mounting bores | 6 |
| Number of Teeth | 135 |
| Max. Clearance Angle | 18° |
| Number of teeth (finding the max. clearance angle) | 7 |
| max. side clearance | 2.9mm |
| Supplementary Article/Supplementary Info 2 | Dual-mass flywheel with friction control plate |
| Supplementary Article/Supplementary Info | without pilot bearing |
| More information » | |
| Supplementary Article/Supplementary Info | with central slave cylinder, without pilot bearing, with dual-mass flywheel |
| Supplementary Article/Supplementary Info 2 | with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate |
| Adjustment | with automatic adjustment |
| Number of mounting bores | 6 |
| Max. Clearance Angle | 18° |
| Number of teeth (finding the max. clearance angle) | 7 |
| max. side clearance | 2.9mm |
| Ø | 240mm |
| Number of Teeth | 23 |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Tightening degree | 90° |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 26 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Weight | 18.37kg |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
