OE 4243160280 products
LEXUS: 4243160280
LEXUS: 42431-60280
LEXUS: 42431 60 280
RENAULT: 4243160280
TOYOTA: 4243160280
TOYOTA: 42431-60280
TOYOTA: 42431 60280
TOYOTA: 42431 60 280
TOYOTA (FAW): 4243160280
TOYOTA (FAW): 42431-60280
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Outer Diameter | 330mm |
| Brake Disc Thickness | 18mm |
| Centering Diameter | 110mm |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 17mm |
| Min. thickness | 16mm |
| Brake Disc Type | Vented |
| Inner Diameter | 230mm |
| Fitting Position | Rear Axle |
| More information » | |
| Brake Disc Type | Vented |
| Outer Diameter | 329mm |
| Brake Disc Thickness | 18mm |
| Min. thickness | 16mm |
| Inner Diameter | 230mm |
| Bore Ø | 16.7mm |
| Bolt Hole Circle Ø | 150mm |
| Num. of holes | 5 |
| Height | 102.6mm |
| Centering Diameter | 110mm |
| EU General Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
| More information » | |
$29.10
$34.20
-15%
Sold in pairs
| Fitting Position | Rear Axle |
| Height | 102.7mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 18mm |
| Material | Cast Iron |
| Processing | Untreated |
| Centering Diameter | 110mm |
| Bolt Hole Circle Ø | 150mm |
| Surface | Uncoated |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Wheel Bolt Bore Ø | 16.7mm |
| Outer Diameter | 330mm |
| More information » | |
| Brake Disc Thickness | 18.2mm |
| Rim | 8-Hole |
| Number of mounting bores | 5 |
| Thickness | 102.5mm |
| Outer Diameter | 330mm |
| Bolt Hole Circle Ø | 150mm |
| Surface | Coated |
| Brake Disc Type | vented |
| Fitting Position | Rear Axle |
| Min. thickness | 16mm |
| Centering Diameter | 110mm |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$36.60
$43.10
-16%
Sold in pairs
| Fitting Position | Rear Axle |
| Height | 102.7mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 18mm |
| Material | Cast Iron |
| Processing | Untreated |
| Centering Diameter | 110mm |
| Bolt Hole Circle Ø | 150mm |
| Surface | Uncoated |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Wheel Bolt Bore Ø | 16.7mm |
| Outer Diameter | 330mm |
| More information » | |
| Brake Disc Thickness | 18.2mm |
| Rim | 8-Hole |
| Number of mounting bores | 5 |
| Thickness | 103mm |
| Outer Diameter | 330mm |
| Bolt Hole Circle Ø | 150mm |
| Surface | Coated |
| Brake Disc Type | vented |
| Fitting Position | Rear Axle |
| Min. thickness | 16mm |
| Centering Diameter | 110mm |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$37.20
$43.70
-15%
Sold in pairs
| Outer Diameter | 330mm |
| Brake Disc Thickness | 18mm |
| Min. thickness | 16mm |
| Height | 102.5mm |
| Rim | 5-Hole |
| Brake Disc Type | Vented |
| Centering Diameter | 110mm |
| Bolt Hole Circle Ø | 150mm |
| Surface | Coated |
| Hub Ø | 239mm |
| More information » | |
| Centering Diameter | 110mm |
| Min. thickness | 16mm |
| Height | 102.5mm |
| Brake Disc Thickness | 18mm |
| Outer Diameter | 329mm |
| Bolt Hole Circle Ø | 149.9mm |
| Thread Size | 16, 5 |
| Num. of holes | 5 |
| Brake Disc Type | Vented |
| Colour | black |
| Surface | painted |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Brake Disc Type | Vented |
| Num. of holes | 5 |
| Appr. stamp | R90 Homologated |
| Surface | Oiled |
| Outer Diameter | 330mm |
| Brake Disc Thickness | 18mm |
| Bolt Hole Circle Ø | 150mm |
| Centering Diameter | 110mm |
| Height | 102.5mm |
| More information » | |
| Outer Diameter | 329.5mm |
| Brake Disc Thickness | 18mm |
| Min. thickness | 16mm |
| Height | 102.4mm |
| Bolt Hole Circle Ø | 150mm |
| Brake Disc Type | Vented |
| Centering Diameter | 110mm |
| Num. of holes | 5 |
| Surface | Oiled |
| Drill Ø, up to | 16.6mm |
| More information » | |
| Fitting Position | Rear Axle |
| Bolt Hole Circle Ø | 110mm |
| Height | 103mm |
| Outer Diameter | 329mm |
| Brake Disc Thickness | 18mm |
| Min. thickness | 17mm |
| Number of bores | 5 |
| Brake Disc Type | Vented |
| Surface | painted |
| for OE No. | 4243160281 |
| More information » | |
| Brake Disc Type | vented |
| Brake Disc Thickness | 18mm |
| Num. of holes | 5 |
| Height | 103mm |
| Centering Diameter | 110mm |
| Outer Diameter | 329mm |
| Surface | Coated |
| Min. thickness | 16mm |
| Tightening Torque | 112Nm |
| More information » | |
| Brake Disc Thickness | 18mm |
| Min. thickness | 16mm |
| Brake Disc Type | Vented |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 150mm |
| Height | 102.6mm |
| Centering Diameter | 110mm |
| Inner Diameter | 230mm |
| Bore Ø | 16.7mm |
| Fitting Position | Rear Axle |
| Outer Diameter | 329.2mm |
| More information » | |
| Brake Disc Type | vented |
| Outer Diameter | 329mm |
| Brake Disc Thickness | 18mm |
| Height | 102.7mm |
| Min. thickness | 16mm |
| Surface | Coated |
| Inner Diameter | 230mm |
| Bolt Hole Circle Ø | 150mm |
| Centering Diameter | 110mm |
| Hole Pitch/Number | 05/13 |
| Wheel Bolt Bore Ø | 16.7mm |
| Supplementary Article/Supplementary Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 33.8cm |
| Packaging width | 33.8cm |
| Packaging height | 22cm |
| Weight | 8kg |
| More information » | |
| Brake Disc Type | Vented |
| Outer Diameter | 329mm |
| Brake Disc Thickness | 18mm |
| Quantity required | 1 |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Version | JC |
| Height | 102.7mm |
| Bolt Hole Circle Ø | 150mm |
| Centering Diameter | 110mm |
| Num. of holes | 5 |
| Quantity Unit | Set |
| Surface | Coated |
| Weight | 16.65kg |
| Min. thickness | 16mm |
| Hole Pitch/Number | 5+8 |
| Container Type | Carton |
| Packaging length | 33cm |
| Packaging width | 33cm |
| Packaging height | 23cm |
| More information » | |
| Outer Diameter | 329.2mm |
| Brake Disc Thickness | 18mm |
| Min. thickness | 16mm |
| Brake Disc Type | Vented |
| Surface | Coated |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 150mm |
| Height | 102.6mm |
| Centering Diameter | 110mm |
| Inner Diameter | 230mm |
| Bore Ø | 16.7mm |
| Appr. stamp | E1 90R-02C0296/1238 |
| MAPP code available | |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
