OE 4L105266AF products
AUDI: 4L105266AF
AUDI: 4L 105 266 AF
SEAT: 4L105266AF
SEAT: 4L 105 266 AF
SKODA: 4L105266AF
SKODA: 4L 105 266 AF
VW: 4L105266AF
VW: 4L 105 266 AF
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Hub Profile | 24, 3x21, 8 |
| Number of Teeth | 23 |
| Ø | 239mm |
| Extention Force | 7, 200N |
| Outer Diameter 2 | 240mm |
| Friction Lining Inner Diameter | 170mm |
| Engine Features/Arrangement | for engines with dual-mass flywheel |
| for flywheel manufacturer | LUK |
| Outer Diameter | 289mm |
| Number of mounting bores | 6 |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Tightening Torque | 60Nm |
| Tightening degree | 90° |
| for flywheel depth | 64mm |
| Weight | 12.32kg |
| More information » | |
| Transmission Type | Manual Transmission |
| Number of Teeth | 7 |
| Ø | 289mm |
| Number of mounting bores | 6 |
| for flywheel depth | 64.23mm |
| Max. Clearance Angle | 18° |
| max. side clearance | 2.9mm |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with single-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 24, 3 x 21, 8 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | Special tools for mounting not necessary |
| Weight | 19.67kg |
| More information » | |
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Tightening degree | 50° |
| Clutch Pressure Plate Outer Diameter | 241mm |
| Number of Teeth | 23 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Weight | 17.98kg |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with single-mass flywheel, without central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 24, 3 x 21, 8 |
| Weight | 19.05kg |
| Supplementary Article/Supplementary Info 2 | Special tools for mounting not necessary |
| More information » | |
| Number of mounting bores | 6 |
| Number of Teeth | 23 |
| Ø | 240mm |
| New Part | |
| Supplementary Article/Supplementary Info | with single-mass flywheel, with flywheel screws, with central slave cylinder |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 24, 3 x 21, 8 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 29mm |
| Material | Plastic |
| Overall Length | 63.1mm |
| Supplementary Article/Supplementary Info 2 | Special tools for mounting not necessary |
| Weight | 19.84kg |
| More information » | |
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| for flywheel manufacturer | LUK |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Tightening degree | 90° |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Mounting Type | Crimped |
| Weight | 17.99kg |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
