OE 569105 products
GENERAL MOTORS: 5 69 105
OPEL: 569105
OPEL: 5 69 105
OPEL: 569 105
SAAB: 569105
VAUXHALL: 5 69 105
VAUXHALL: 569105
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Brake Disc Type | solid |
| Num. of holes | 5 |
| Appr. stamp | R90 Homologated |
| Surface | Oiled |
| Outer Diameter | 260mm |
| Brake Disc Thickness | 10mm |
| Bolt Hole Circle Ø | 110mm |
| Centering Diameter | 65.5mm |
| Height | 69.3mm |
| More information » | |
| Thickness | 10mm |
| Height | 69.2mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Num. of holes | 5 |
| Centering Diameter | 65.5mm |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Fitting Position | Rear Axle |
| Outer Diameter | 260mm |
| More information » | |
| Outer Diameter | 260mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Height | 69.2mm |
| Rim | 5-Hole |
| Brake Disc Type | solid |
| Centering Diameter | 65mm |
| Bolt Hole Circle Ø | 110mm |
| Hub Ø | 170mm |
| More information » | |
| Outer Diameter | 260mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Height | 69.2mm |
| Bolt Hole Circle Ø | 110mm |
| Brake Disc Type | solid |
| Centering Diameter | 65.5mm |
| Num. of holes | 5 |
| Surface | Oiled |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| fulfils ECE standard | ECE-R90 |
| Drill Ø, up to | 14.3mm |
| More information » | |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Height | 69mm |
| Centering Diameter | 66mm |
| Outer Diameter | 260mm |
| Min. thickness | 8mm |
| Tightening Torque | 110Nm |
| More information » | |
| Outer Diameter | 260mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Brake Disc Type | solid |
| Surface | Coated |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 110mm |
| Height | 69.2mm |
| Centering Diameter | 65.5mm |
| Inner Diameter | 160mm |
| Bore Ø | 14.3mm |
| MAPP code available | |
| Appr. stamp | E1 90R-02C0248/0695 |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
