OE 68031306AB products
DODGE: 68031306AB
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Connector type | PIN |
| Tightening torque from | 8Nm |
| Rated Current | 7.5A |
| Tightening torque to | 15Nm |
| Glow Plug Type | Metal glow plug |
| Mounting Inclination | 93° |
| Voltage | 4.4V |
| Length 1 | 70mm |
| Length 2 | 29mm |
| Overall Length | 117mm |
| Thread Size | M8x1, 00 |
| Spanner Size | 8 |
| Heat-up Time | 8min |
| More information » | |
$5.90
$6.90
-15%
| Tightening torque from | 8Nm |
| Connector type | PIN |
| Tightening torque to | 12Nm |
| Rated Current | 8A |
| Glow Plug Type | Metal glow plug |
| Mounting Inclination | 93° |
| Voltage | 4.4V |
| Length 1 | 70mm |
| Length 2 | 29.5mm |
| Overall Length | 116.5mm |
| Thread Size | M8X1 |
| Spanner Size | 8 |
| Heat-up Time | 2min |
| More information » | |
$8.30
$9.80
-16%
| Glow Plug Type | after-glow capable, Pencil-type Glow Plug |
| Voltage | 4.4V |
| Version | Double Coil, Fast Heating |
| Thread Size | M8x1, 0 |
| Overall Length | 117mm |
| Ø | 4mm |
| Fitting Depth | 30mm |
| Connector type | 4 mm PIN |
| Container Type | Carton |
| Spanner Size | 8 mm |
| Cone Pitch | 93 |
| Fuel Mixture Formation | Unit Injector System (UIS) |
| Rated Current | 25A |
| Failure Moment | 20Nm |
| Tightening torque from | 8Nm |
| Tightening torque to | 10Nm |
| Packaging length | 14.2cm |
| Packaging width | 2.7cm |
| Packaging height | 2.3cm |
| More information » | |
| Glow Plug Type | Metal glow plug |
| Voltage | 4.4V |
| Rated Current | 7.5A |
| Resistor | 0.5Ohm |
| Overall Length | 118mm |
| Fitting Depth | 30mm |
| Thread Size | M8 x 1, 0 |
| Spanner Size | 8 mm |
| Connector type | PIN |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 