OE 6F141015C products
AUDI: 6F 141 015 C
AUDI: 6F141015C
SEAT: 6F 141 015 C
SEAT: 6F141015C
SKODA: 6F 141 015 C
SKODA: 6F141015C
VW: 6F 141 015 C
VW: 6F141015C
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Transmission Type | 6-Speed Manual Transmission |
| Outer Diameter | 241mm |
| Number of Teeth | 23 |
| Multi-piece | two-piece |
| Supplementary Article/Supplementary Info | with synthetic grease |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| for OE No. | 06F 141 015 C |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$129.50
$152.30
-15%
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 24, 2 x 21, 8 |
| Supplementary Article/Supplementary Info | without central slave cylinder |
| for flywheel manufacturer | LUK |
| Weight | 5.75kg |
| Supplementary Article/Supplementary Info 2 | Special tools for mounting not necessary |
| More information » | |
| New Part | |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Hub Profile | 24, 2 x 21, 8 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| for flywheel manufacturer | LUK |
| Weight | 6.08kg |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Tightening degree | 50° |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Weight | 17.58kg |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Tightening degree | 50° |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Weight | 17.6kg |
| More information » | |
| New Part | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with flywheel screws, with pressure plate screws, with central slave cylinder |
| Number of mounting bores | 6 |
| Tightening Torque | 60Nm |
| Tightening degree | 60° |
| Clutch Pressure Plate Outer Diameter | 240mm |
| Number of Teeth | 23 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 31mm |
| Material | Aluminium |
| Supplementary Article/Supplementary Info 2 | without sensor, Special tools for mounting not necessary |
| Weight | 17.61kg |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.