OE 6R0615601 products
AUDI: 6R0615601
AUDI: 6R0 615 601
AUDI (FAW): 6R0 615 601
CADILLAC: 6R0 615 601
CUPRA: 6R0615601
SEAT: 6R0615601
SEAT: 6R0 615 601
SKODA: 6R0615601
SKODA: 6R0 615 601
VAG: 6R0 615 601
VAG: 6R0615601
VW: 6R0615601
VW: 6R0 615 601
VW (FAW): 6R0 615 601
VW (SVW): 6R0 615 601
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Height | 48.3mm |
| Centering Diameter | 65mm |
| Brake Disc Thickness | 10mm |
| Brake Disc Type | solid |
| Num. of holes | 9 |
| Outer Diameter | 272mm |
| Min. thickness | 8mm |
| More information » | |
| Rim | 5-Hole |
| Fitting Position | Rear Axle |
| Length | 271.8mm |
| Height | 48.3mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Outer Diameter | 272mm |
| Centering Diameter | 65mm |
| Surface | Oiled |
| No. of holes 1 | 1 |
| Number of mounting bores | 4 |
| More information » | |
| Brake Disc Thickness | 10mm |
| Num. of holes | 9 |
| Min. thickness | 9mm |
| Centering Diameter | 65mm |
| Height | 48.3mm |
| Outer Diameter | 271.8mm |
| Fitting Position | Rear Axle |
| Brake Disc Type | solid |
| More information » | |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Height | 48mm |
| Centering Diameter | 65mm |
| Outer Diameter | 272mm |
| Surface | Coated |
| Min. thickness | 8mm |
| Tightening Torque | 120Nm |
| Fitting Position | Rear Axle |
| More information » | |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Surface | Coated |
| Fitting Position | Rear Axle |
| Num. of holes | 5 |
| Outer Diameter | 272mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Height | 48mm |
| Centering Diameter | 65mm |
| Outer Diameter | 272mm |
| Surface | Coated |
| Min. thickness | 8mm |
| Tightening Torque | 120Nm |
| Fitting Position | Rear Axle |
| More information » | |
| Supplementary Article/Supplementary Info 2 | without wheel studs, without wheel hub, without bolts/screws |
| Fitting Position | Rear Axle |
| Height | 48.4mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Material | Cast Iron |
| Processing | Untreated |
| Outer Diameter | 272mm |
| Centering Diameter | 65mm |
| Bolt Hole Circle Ø | 100mm |
| Surface | Uncoated |
| Wheel Bolt Bore Ø | 15.6mm |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Rim | 5-Hole |
| Thread Size | 15, 6 |
| Bolt Hole Circle Ø | 100mm |
| Height | 48.2mm |
| Centering Diameter | 65mm |
| Colour | black |
| Surface | painted |
| Appr. stamp | E1 90R-02 C0190/0535 |
| SVHC | No information available, please contact the manufacturer! |
| More information » | |
| Brake Disc Type | solid |
| Num. of holes | 5 |
| Appr. stamp | R90 Homologated |
| Surface | Coated |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Bolt Hole Circle Ø | 100mm |
| Centering Diameter | 65mm |
| Height | 48.2mm |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Height | 48.3mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Inner Diameter | 149mm |
| Bolt Hole Circle Ø | 112mm |
| Centering Diameter | 65mm |
| Hole Pitch/Number | 05/10 |
| Wheel Bolt Bore Ø | 15.3mm |
| Supplementary Article/Supplementary Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Weight | 3.9kg |
| Assy./disassy. by qualified personnel required! | |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Height | 48.3mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Bolt Hole Circle Ø | 100mm |
| Centering Diameter | 65mm |
| Hole Pitch/Number | 05/06 |
| Supplementary Article/Supplementary Info 2 | without wheel hub, without wheel studs |
| Weight | 4kg |
| Assy./disassy. by qualified personnel required! | |
| More information » | |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Min. thickness | 8mm |
| Height | 48.3mm |
| Bolt Hole Circle Ø | 112mm |
| Brake Disc Type | solid |
| Centering Diameter | 65mm |
| Num. of holes | 9 |
| Surface | Oiled |
| fulfils ECE standard | ECE-R90 |
| Drill Ø, up to | 15.3mm |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Quantity required | 1 |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Version | JC |
| Height | 48mm |
| Num. of holes | 5 |
| Quantity Unit | Set |
| Surface | Coated |
| Appr. stamp | R90 Homologated |
| Weight | 8.37kg |
| Bore Ø | 65mm |
| Min. thickness | 8mm |
| Container Type | Carton |
| Packaging length | 29cm |
| Packaging width | 29cm |
| Packaging height | 11.5cm |
| More information » | |
| Fitting Position | Rear Axle |
| Brake Disc Type | solid |
| Surface | Coated |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Height | 48mm |
| Rim | 5-Hole |
| Bolt Hole Circle Ø | 100mm |
| Centering Diameter | 65mm |
| Appr. stamp | ECE R90 APPROVED |
| Min. thickness | 8mm |
| Hole Pitch/Number | 6/5 |
| Weight | 3.9kg |
| More information » | |
$30.60
$35.90
-15%
Sold in pairs
| Outer Diameter | 272mm |
| Brake Disc Thickness | 9.7mm |
| Min. thickness | 8mm |
| Brake Disc Type | solid |
| Surface | Coated |
| Num. of holes | 5 |
| Bolt Hole Circle Ø | 100mm |
| Height | 48.2mm |
| Centering Diameter | 65mm |
| Inner Diameter | 149mm |
| Bore Ø | 15.3mm |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Appr. stamp | E1 90R-02C0165/0360 |
| MAPP code available | |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 272mm |
| Brake Disc Thickness | 10mm |
| Height | 48.3mm |
| Min. thickness | 8mm |
| Surface | Coated |
| Inner Diameter | 149mm |
| Bolt Hole Circle Ø | 100mm |
| Centering Diameter | 65mm |
| Hole Pitch/Number | 05/06 |
| Wheel Bolt Bore Ø | 15.4mm |
| Supplementary Article/Supplementary Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 30.8cm |
| Packaging width | 30.8cm |
| Packaging height | 12.7cm |
| Weight | 4kg |
| More information » | |
| Brake Disc Type | solid |
| Brake Disc Thickness | 10mm |
| Num. of holes | 5 |
| Supplementary Article/Supplementary Info 2 | with bolts/screws |
| Height | 48mm |
| Centering Diameter | 65mm |
| Outer Diameter | 272mm |
| Surface | Coated |
| Min. thickness | 8mm |
| More information » | |
| Brake Disc Type | solid |
| Min. thickness | 8mm |
| Outer Diameter | 272mm |
| Centering Diameter | 65mm |
| Bolt Hole Circle Ø | 112mm |
| for PR number | 1KF, 1KS, 1KT, 1KX, 2E3 |
| Height | 48.2mm |
| Brake Disc Thickness | 9.7mm |
| Supplementary Article/Supplementary Info 2 | with brake pads |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
