OE 90280463 products
BUICK: 90280463
BUICK (SGM): 90280463
CHEVROLET: 90 280 463
CHEVROLET: 90280463
CHEVROLET (SGM): 90280463
DAEWOO: 90280463
DAEWOO: 90 280 463
GENERAL MOTORS: 90280463
JOHN DEERE: 90280463
OPEL: 90280463
OPEL: 90 280 463
VAUXHALL: 90280463
VW: 90 280 463
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Fitting Position | frontal sided |
| for manufacturer number | 8707022 |
| Inner Diameter | 35mm |
| Outer Diameter | 48mm |
| Height | 7mm |
| Radial Shaft Seal Design | AW/BS |
| Swirl Type | Right-hand Twist |
| Material | MVQ (silicone rubber) |
| Dust Cover | with dust lip |
| More information » | |
| Height | 7mm |
| Inner Diameter | 35mm |
| Outer Diameter | 48mm |
| Swirl Type | Right-hand Twist |
| Height | 7mm |
| Outer Diameter | 48mm |
| Inner Diameter | 35mm |
| Material | MVQ (silicone rubber) |
| Radial Shaft Seal Design | A SL |
| Swirl Type | Right-hand Twist |
| Fitting Position | frontal sided |
| Height | 7mm |
| Inner Diameter | 35mm |
| Outer Diameter | 48mm |
| Material | FPM (fluoride rubber) |
| for OE No. | 55352607 |
| Swirl Type | Right-hand Twist |
| Dust Cover | with dust lip |
| More information » | |
| Fitting Position | transmission sided |
| Height | 7mm |
| Outer Diameter | 48mm |
| Inner Diameter | 35mm |
| Material | NBR (nitrile butadiene rubber) |
| Height 1 | 7mm |
| Outer Diameter 1 | 48mm |
| Inner Diameter | 35mm |
| Material | MVQ (silicone rubber) |
| Rotation Direction | Clockwise rotation |
| Radial Shaft Seal Design | 829S RD W |
| Swirl Type | Right-hand Twist |
| More information » | |
| Material | MVQ (silicone rubber) |
| Inner Diameter | 35mm |
| Outer Diameter | 48mm |
| Height | 7mm |
| Radial Shaft Seal Design | A SL |
| Swirl Type | Right-hand Twist |
$2.40
$2.80
-15%
| Inner Diameter | 35mm |
| Outer Diameter | 48mm |
| Height | 7mm |
| Supplementary Article/Supplementary Info 2 | with intake manifold gasket(s), with exhaust manifold gasket(s) |
| Supplementary Article/Supplementary Info | with cylinder head cover gasket, with valve stem seals, without cylinder head gasket, with camshaft seal |
$20.70
$24.30
-15%
| Supplementary Article/Supplementary Info 2 | with intake manifold gasket(s), with exhaust manifold gasket(s) |
| Supplementary Article/Supplementary Info | with cylinder head cover gasket, with valve stem seals, without cylinder head gasket, with camshaft seal |
$28.40
$33.30
-15%
| Drive Type | Belts |
| Operating Mode | hydraulic |
| Number of Teeth | 46 |
| SVHC | No SVHC present! |
$83.60
$98.40
-16%
| Drive Type | Belts |
| Operating Mode | hydraulic |
| Number of Teeth | 46 |
| SVHC | No SVHC present! |
$99.10
$116.60
-16%
| Drive Type | Belts |
| Operating Mode | hydraulic |
| Number of Teeth | 46 |
| SVHC | No SVHC present! |
$99.40
$117.00
-16%
| Engine Timing | Timing Belt |
| SVHC | No SVHC present! |
$402.10
$473.00
-15%
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
