OE 9202575 products
CADILLAC: 9202575
CADILLAC: 92 02 575
CHEVROLET: 9202575
CHRYSLER: 9202575
CHRYSLER: 9202 575
DAEWOO: 9202575
FIAT: 9202575
GENERAL MOTORS: 9202575
GENERAL MOTORS: 9 202 575
GENERAL MOTORS: 92 02 575
GMC: 9202575
HOLDEN: 9202575
HOLDEN: 92 02 575
HOLDEN: 9 202 575
OPEL: 92 02 575
OPEL: 9202575
OPEL: 92 025 75
OPEL: 9 202 575
SAAB: 92 02 575
SAAB: 9202575
SUBARU: 9202575
VAUXHALL: 92 02 575
VAUXHALL: 9202575
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Oxygen Sensor | Regulating Sensor, Thread pre-greased |
| Fitting Position | Front, before catalytic converter |
| Voltage | 12V |
| Observe service information | |
| Length | 772mm |
| Number of pins | 4-pin connector |
| Conductor Number | 4conductor |
| Cable Length | 710mm |
| Connector Shape | oval |
| Oxygen Sensor | Heated |
| Number of connectors | 4 |
| Plug housing design | Plug sleeve housing |
| Thread Size | M18x1, 5 |
| Line insulation design | with silicone-coated woven-fibre insulation |
| More information » | |
| Weight | 0.175kg |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Overall Length | 470mm |
| Length | 340mm |
| Number of connectors | 4 |
| Oxygen Sensor | Heated |
| Recommended change interval | 250, 000km |
| Cable Length | 290mm |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Heated |
| Supplementary Article/Supplementary Info 2 | without plug |
| Thread Size | M18x1, 5 |
| Line insulation design | with silicone-coated woven-fibre insulation |
| More information » | |
| Number of circuits | 4 |
| Supplementary Article/Supplementary Info 2 | without plug |
| Connector/Clamp | Connector may need adjustment |
| Oxygen Sensor | Heated |
| Supplementary Article/Supplementary Info | with squeeze connector, with attachment/mounting material |
| Cable Length | 480mm |
| Line insulation design | with silicone-coated woven-fibre insulation |
| Thread Size | M18x1, 5 |
| More information » | |
| Oxygen Sensor | Heated |
| Length | 741mm |
| Number of circuits | 4 |
| for OE No. | 06B906265E |
| Quality | Zr insulated gnd, OE EQUIVALENT |
| Conductor Number | 636conductor |
$27.40
$32.20
-15%
| Number of pins | 4-pin connector |
| Voltage | 12V |
| Weight | 0.09kg |
| Resistor | 9Ohm |
| Operating Mode | Electric |
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Length | 800mm, 31.5Inch |
| Number of pins | 4-pin connector |
| Available as universal article as well, see article no. | OS-08P |
$30.40
$35.80
-16%
| Oxygen Sensor | Finger-type Sensor |
| Transmission Type | Manual Transmission |
| Number of circuits | 4 |
| Connector/Clamp | Connector may need adjustment |
| Number of circuits | 4 |
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 300mm |
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 750mm |
| Number of circuits | 4 |
| for OE No. | 55566650 |
| Quality | OE EQUIVALENT |
| Cable Length | 650mm |
| Number of pins | 4-pin connector |
| Oxygen Sensor | Heated |
$32.50
$38.20
-15%
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 750mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| Quality | DENSO |
| Weight | 103g |
| Gross Weight | 152g |
| More information » | |
| Length | 750mm |
| Number of circuits | 4 |
| Conductor Number | 4conductor |
| Resistor | 6Ohm |
| Cable Length | 750mm |
| Oxygen Sensor | Heated |
$34.70
$40.80
-15%
| Voltage | 12V |
| Length | 741mm |
| Weight | 0.11kg |
| Operating Mode | Electric |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
| Cable Length | 786mm |
| Oxygen Sensor | Heated |
| Oxygen Sensor | Heated, Regulating Sensor |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 800mm |
| Guarantee | 3 years guarantee |
$41.30
$48.50
-15%
| Voltage | 12V |
| Length | 770mm |
| Weight | 0.14kg |
| Resistor | 6Ohm |
| Operating Mode | Electric |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Always compare old and new part (in particular OE No.) | |
| More information » | |
| Oxygen Sensor | Switching-type Oxygen Sensor |
| Number of circuits | 4 |
| Supplementary Article/Supplementary Info 2 | without plug |
| Oxygen Sensor | Regulating Sensor |
| Cable Length | 660mm |
| Number of pins | 4-pin connector |
| Assy./disassy. by qualified personnel required! | |
| Oxygen Sensor | Heated, Regulating Sensor |
| External Thread Size | M18 x 1, 5 |
| Spanner Size | 22 |
| Number of circuits | 4 |
| Cable Length | 800mm |
| Guarantee | 3 years guarantee |
| Number of circuits | 4 |
| Length | 800mm |
| Number of pins | 4-pin connector |
| Techn. Info. No. | Universal 77004 |
| Oxygen Sensor | Heated, Switching-type Oxygen Sensor |
| Number of circuits | 4 |
| Length | 800mm |
| Oxygen Sensor | Heated, Finger-type Sensor, Switching-type Oxygen Sensor |
| Thread Size | M18x1.5 |
| Cable Length | 740mm |
| Number of pins | 4-pin connector |
| for manufacturer | DENSO |
| for OE No. | 855356 |
| Quality | DENSO |
| Weight | 114g |
| Gross Weight | 144g |
| More information » | |
| Fitting Position | before catalytic converter, after catalytic converter |
| Oxygen Sensor | Planar Sensor, Thread pre-greased, Heated |
| Number of pins | 4-pin connector |
| Cable Length | 800mm |
| Thread Size | M18x1, 5 |
| Switch Pressure | 4bar |
| Connector Shape | rectangular |
| Weight | 0.15kg |
| More information » | |
| Length | 750mm |
| Number of connectors | 4 |
$58.30
$68.60
-16%
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
