OE BC0116530 products
FORD (CHANGAN): BC0116530
FORD (CHANGAN): BC01-16-530
MAZDA: BC0116530
MAZDA: BC01-16-530
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Weight | 0.382kg |
| Ø | 28mm |
$22,20
$26,10
-15%
ADD TO BASKET
| for OE No. | 1212061 |
$24,80
$29,20
-16%
ADD TO BASKET
$29,60
$34,80
-15%
ADD TO BASKET
| Number of mounting bores | 3 |
| Weight | 0.29kg |
| Observe service information | |
$33,50
$39,40
-15%
ADD TO BASKET
| Fabrication Number | NWS-FR-007 |
$34,80
$40,90
-15%
ADD TO BASKET
| Base body material | Plastic |
$38,80
$45,60
-15%
ADD TO BASKET
| Brake System | FTE |
| Piston Ø | 28mm |
| Material | Plastic |
$45,60
$53,70
-16%
ADD TO BASKET
| Bore Ø | 28mm |
| Material | Plastic |
| Number of mounting bores | 3 |
| Supplementary Article/Info 2 | without sensor |
| for manufacturer number | ZA2802.4.16 |
| Weight | 0.41kg |
$46,10
$54,20
-15%
ADD TO BASKET
| Bore Ø | 28mm |
| Material | Plastic |
| Number of mounting bores | 3 |
| Supplementary Article/Info 2 | without sensor |
| for manufacturer number | ZA2802.4.16 |
| Weight | 0.41kg |
$48,20
$56,60
-15%
ADD TO BASKET
| Bore Ø | 28mm |
| Material | Plastic |
| Number of mounting bores | 3 |
| Supplementary Article/Info 2 | without sensor |
| for manufacturer number | ZA2802.4.16 |
| Weight | 0.41kg |
$49,90
$58,70
-15%
ADD TO BASKET
| Outer Diameter | 221mm |
| Number of Teeth | 17 |
| Multi-piece | three-piece |
| Supplementary Article/Supplementary Info | with central slave cylinder, with synthetic grease |
| Weight | 4.98kg |
| for OE No. | Y401-16-490A S1 |
| Observe service information | |
| More information » | |
$94,80
$111,50
-15%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 190mm |
| Number of Teeth | 17 |
| Hub Profile | 19, 9 x 16, 9 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting bores at central slave cylinder | 3 |
| Weight | 4.27kg |
| More information » | |
$105,00
$123,50
-15%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 200mm |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Weight | 4.34kg |
$110,60
$130,10
-15%
ADD TO BASKET
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of Parts | 3-part |
| Hub Profile | 20 x 17 |
| Number of Teeth | 17 |
$126,20
$148,40
-15%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 220mm |
| Number of Teeth | 24 |
| Hub Profile | 19, 9 x 16, 9 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 28mm |
| Material | Plastic |
| Supplementary Article/Info 2 | without sensor |
| Weight | 5.25kg |
| More information » | |
$142,20
$167,30
-16%
ADD TO BASKET
| New Part | |
| Clutch Pressure Plate Outer Diameter | 220mm |
| Number of Teeth | 17 |
| Hub Profile | 19, 9 x 16, 9 |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Number of mounting bores at central slave cylinder | 3 |
| Weight | 5.12kg |
| More information » | |
$143,90
$169,20
-15%
ADD TO BASKET
| New Part | |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| Weight | 5.69kg |
$174,00
$204,70
-15%
ADD TO BASKET
| New Part | |
| Supplementary Article/Supplementary Info | with central slave cylinder |
| for flywheel manufacturer | LUK |
| Weight | 4.68kg |
$216,10
$254,30
-16%
ADD TO BASKET
| New Part | |
| only to be used within set | |
| Supplementary Article/Supplementary Info | with dual-mass flywheel, with central slave cylinder |
| for flywheel manufacturer | VALEO |
| Number of mounting bores | 6 |
| Supplementary Article/Info 2 | with screw set, with lock screw set, without sensor |
| Tightening Torque | 30Nm |
| Tightening degree | 90° |
| Clutch Pressure Plate Outer Diameter | 254mm |
| Number of Teeth | 17 |
| Number of mounting bores at central slave cylinder | 3 |
| Bore Ø | 28mm |
| Material | Plastic |
| Mounting Type | Clipped |
| Weight | 17.07kg |
| More information » | |
$483,60
$568,90
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
