OE DBP7954 products
HONDA: DBP7954
MG: DBP 7954
ROVER: DBP 7954
ROVER: DBP7954
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Outer Diameter | 231mm |
| Brake Disc Thickness | 17mm |
| Min. thickness | 15mm |
| Height | 44mm |
| Rim | 4-Hole |
| Brake Disc Type | Vented |
| Centering Diameter | 61mm |
| Bolt Hole Circle Ø | 100mm |
| Hub Ø | 135mm |
| More information » | |
| Brake Disc Type | Vented |
| Num. of holes | 4 |
| Appr. stamp | R90 Homologated |
| Surface | Oiled |
| Outer Diameter | 231mm |
| Brake Disc Thickness | 17mm |
| Min. thickness | 15mm |
| Bolt Hole Circle Ø | 100mm |
| Centering Diameter | 61.1mm |
| Height | 43.8mm |
| More information » | |
| Brake Disc Thickness | 17mm |
| Rim | 4-Hole |
| Number of mounting bores | 4 |
| Thickness | 44mm |
| Outer Diameter | 231mm |
| Bolt Hole Circle Ø | 100mm |
| Surface | Coated |
| Brake Disc Type | vented |
| Fitting Position | Front Axle |
| Min. thickness | 15mm |
| Centering Diameter | 61mm |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$16.90
$19.80
-15%
Sold in pairs
| Brake Disc Thickness | 17mm |
| Rim | 4-Hole |
| Number of mounting bores | 4 |
| Thickness | 44mm |
| Outer Diameter | 231mm |
| Bolt Hole Circle Ø | 100mm |
| Surface | Coated |
| Brake Disc Type | vented |
| Fitting Position | Front Axle |
| Min. thickness | 15mm |
| Centering Diameter | 61mm |
| Observe service information | |
| Guarantee | 3 years guarantee |
| More information » | |
$17.30
$20.30
-15%
Sold in pairs
| Fitting Position | Front Axle |
| Height | 44mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 17mm |
| Material | Cast Iron |
| Processing | Untreated |
| Outer Diameter | 231mm |
| Centering Diameter | 61mm |
| Bolt Hole Circle Ø | 100mm |
| Surface | Uncoated |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Wheel Bolt Bore Ø | 12.7mm |
| More information » | |
| Fitting Position | Front Axle |
| Height | 44mm |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 17mm |
| Material | Cast Iron |
| Processing | Untreated |
| Outer Diameter | 231mm |
| Centering Diameter | 61mm |
| Bolt Hole Circle Ø | 100mm |
| Surface | Uncoated |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Wheel Bolt Bore Ø | 12.7mm |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
