OE DS7G-12405-BA products
FORD: DS7G-12405-BA
FORD: DS7G 12405 BA
FORD: DS7G12405BA
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Electrode Gap | 0.7mm |
| Tightening Torque | 20Nm |
| Tightening degree | 15° |
| External Thread | 12mm |
| Thread Pitch | 1.25mm |
| Thread Length | 25mm |
| Spanner Size | 14 |
| Spark Position | 3mm |
| Number of pins | 1-pin connector |
| More information » | |
| Tightening Torque | 20Nm |
| Electrode Gap | 0.65mm |
| Thread Size | 12 |
| Spanner Size | 14 |
| Spark Plug | 1 - Earthed Electrode |
| Thread Length | 28mm |
| Assy./disassy. by qualified personnel required! | |
| More information » | |
| Spanner Size | 14 mm |
| Thread Size | M12 x 1, 25 |
| Thread Length | 25mm |
| Spark Plug | Connector Type SAE, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with taper gasket seat |
| Spark Position | 6.5mm |
| Spark Plug | 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode |
| Electrode Gap | 0.7mm |
| Resistor from | 3kOhm |
| Resistor to | 10kOhm |
| Thread Size | M12x1.25 |
| Thread Length | 23.1mm |
| Techn. Info. No. | RET3ZWYPB |
| Tightening torque from | 15Nm |
| Tightening torque to | 20Nm |
| Connector type | SAE |
| Container Type | Carton |
| Spanner Size | 14 mm |
| Quality Grade | Pt GE |
| Spark Position | 3.5mm |
| Shaft Length | 3.4mm |
| Projection | 1.5mm |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
