OE MB928120 products
CHRYSLER: MB928120
MITSUBISHI: MB928120
MITSUBISHI: MB 928120
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Fitting Position | Front Axle |
| Brake Disc Type | Vented |
| Brake Disc Thickness | 24mm |
| Bolt Hole Circle Ø | 108mm |
| Num. of holes | 6 |
| Height | 45mm |
| Centering Diameter | 87mm |
| Surface | Coated |
| Outer Diameter | 276mm |
| More information » | |
| Fitting Position | Front Axle |
| Outer Diameter | 276mm |
| Height | 45.1mm |
| Brake Disc Thickness | 24mm |
| Min. thickness | 22.4mm |
| Centering Diameter | 87mm |
| Bolt Hole Circle Ø | 108mm |
| Wheel Bolt Bore Ø | 10.6mm |
| Num. of holes | 6 |
| Brake Disc Type | Vented |
| Quantity required | 2 |
| More information » | |
| Outer Diameter | 276mm |
| Brake Disc Thickness | 24mm |
| Min. thickness | 22.4mm |
| Height | 45.3mm |
| Rim | 6-Hole |
| Brake Disc Type | Vented |
| Centering Diameter | 87mm |
| Bolt Hole Circle Ø | 108mm |
| Hub Ø | 148mm |
| More information » | |
| Brake Disc Type | vented |
| Brake Disc Thickness | 24mm |
| Num. of holes | 6 |
| Height | 45mm |
| Centering Diameter | 87mm |
| Outer Diameter | 276mm |
| Surface | Coated |
| Min. thickness | 22.4mm |
| Tightening Torque | 98Nm |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
