OE RTC3194 products
LAND ROVER: RTC3194
LAND ROVER: RTC-3194
LAND ROVER: RTC 3194
ROVER: RTC3194
ROVER: RTC 3194
OE number or original number means the number of the whole component or part of it installed on the vehicle on the production line by the car manufacturer. The meaning of the OE number is equivalent to "Genuine Number"
| Brake Disc Type | solid |
| Centering Diameter | 102mm |
| Outer Diameter | 298mm |
| Height | 70mm |
| Min. thickness | 13mm |
| Brake System | AP LOCKHEED |
| Brake Disc Thickness | 14mm |
| Num. of holes | 5 |
| More information » | |
| Fitting Position | Rear Axle |
| Height | 70mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 14mm |
| Material | Cast Iron |
| Processing | Untreated |
| Outer Diameter | 298.3mm |
| Num. of holes | 5 |
| Centering Diameter | 101.7mm |
| Bolt Hole Circle Ø | 127mm |
| Surface | Uncoated |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Wheel Bolt Bore Ø | 10.3mm |
| More information » | |
| Fitting Position | Rear Axle |
| Height | 70mm |
| Brake Disc Type | solid |
| Brake Disc Thickness | 14mm |
| Material | Cast Iron |
| Processing | Untreated |
| Outer Diameter | 298.3mm |
| Num. of holes | 5 |
| Centering Diameter | 101.7mm |
| Bolt Hole Circle Ø | 127mm |
| Surface | Uncoated |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Wheel Bolt Bore Ø | 10.3mm |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 298mm |
| Brake Disc Thickness | 14mm |
| Height | 70mm |
| Min. thickness | 13mm |
| Inner Diameter | 160mm |
| Bolt Hole Circle Ø | 127mm |
| Centering Diameter | 101.6mm |
| Hole Pitch/Number | 05/05 |
| Wheel Bolt Bore Ø | 10.3mm |
| Supplementary Article/Supplementary Info 2 | without wheel hub, without wheel bearing, without wheel studs |
| Packaging length | 30.8cm |
| Packaging width | 30.8cm |
| Packaging height | 16cm |
| Weight | 6.9kg |
| More information » | |
| Brake Disc Type | solid |
| Outer Diameter | 298mm |
| Brake Disc Thickness | 14mm |
| Quantity required | 1 |
| Supplementary Article/Supplementary Info 2 | without bolts/screws |
| Version | JC |
| Height | 70mm |
| Bolt Hole Circle Ø | 127mm |
| Centering Diameter | 101.6mm |
| Num. of holes | 5 |
| Quantity Unit | Set |
| Surface | Coated |
| Appr. stamp | R90 Homologated |
| Weight | 14.11kg |
| Min. thickness | 13mm |
| Tightening Torque | 130Nm |
| Container Type | Carton |
| Packaging length | 31cm |
| Packaging width | 31cm |
| Packaging height | 15cm |
| More information » | |
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.