Pneumatic hammers
Goods available only in e-shop
Previous 1 2 Next
Suruõhuvoolust controlled pneumatic hammer. Kavandatud keevitamise and neetimisega connected elements for separation. this võimaldab metal and sheet metal lõikamist, mulgustamist, autotöökodades and tootmisettevõtetes meisterdamise ajal. pressure: 0,63 MPa Efficiency factor: 113 l / min 4 500 lööki per minute work fast edenemiseks light, composite body and small dimensions ensure comfortable work...
21,10€
ADD TO BASKET
Suruõhuvoo jõul working needle- pneumatic hammer. intended other hulgas , scaling, rust for removal teraskonstruktsioonielementidest.19 with needle pressure: 0,63 MPa Efficiency factor: 113 l / min4 500 lööki per minute work fast edenemiseks adjustable löögid per minutevõimaldab to be treated ebakorrapäraseid surfaces common connectionparameetrid working pressure [MPa]: 0,63 output [l / min]: 113 ...
31,00€
ADD TO BASKET
rotating 10,2 mm flat chisel
33,70€
ADD TO BASKET
Available 1pc. rotating 10,2 mm straight punch chisel
33,70€
ADD TO BASKET
Available 1pc. rotating 10,2 mm koonuspeitel
33,70€
ADD TO BASKET
Available 2pc. rotating 10,2 mm flat chisel
33,70€
ADD TO BASKET
spare nõelad Artikli no: 9035-050 EAN: 4000896139385 Tooteteave spare nõelad 9035-5 . 19 nõela, ⌀ 3 mm dimesions / length: 181 mm net weight: 0,2 kg
35,50€
ADD TO BASKET
Available 2pc. rotating 10,2 mm ääristamismeisel
41,30€
ADD TO BASKET
impacts number ( cycle / min): 4300 piston Shock (mm): 43Lõikeri length (mm): 125 average air consumption (l / min): 100 working pressure ( band): 6.3 weight (kg): 1.1
41,60€
ADD TO BASKET
Set of 13 needles to fit the OK-04.0040 precision needle hammer. Needles are a wearing part and may wear. It is important not to press too hard against the surface to be cleaned when working with the hammer, in order to avoid excessive wear of the needles. ROOKS focuses on specialist tools so that you can repair your customers' favorite cars easier, faster and efficiently. They also remember about...
42,80€
ADD TO BASKET
hammer - 19 with needle socket - pressure: 0,63 MPa - productivity: 113 l / min - impacts frequency 4500 lööki / min ensures work fast edenemise - adjustable impacts number per minute - võimaldab to be treated ebakorrapäraseid surfaces - standardühendus
43,60€
ADD TO BASKET
4 chisel, quick connection, working pressure 6-7 bari, 3000 lööki per minute, Air Consumption 113 l/min
46,30€
ADD TO BASKET
handy väike pneumatic hammer suitable for perfectly difficulty to-reach places. for example tie rod end endings out for punching round chisel: 125 mm impacts number per minute: 4300 Peitli input: 10,2 mm working pressure: 6,2 bar Kolmapäev inputs: 1/4 " Air Consumption: 186 l / min weight: 1,08 kg length: 135 mm
49,60€
ADD TO BASKET
Available 3pc. NEO pneumaatilist löögihaamrit (viide 14-028) is characterized by compact design, which võimaldab tal to work difficulty accessible places. it has 1/4 "õhuühendus. tool universaalseks for use, intended lehtmetallist tööde puhul sepistamiseks or ehitusplatsil for use. CE-certificate kinnitab Product high quality. NEO Brand corresponds to professionaalide ootustele. EAN 5907558442649 Air Consumption...
56,30€
ADD TO BASKET
59,20€
ADD TO BASKET
• high-quality middle gear õhuhaamer Delivered hoiukarbis. • set contains also varuvedruhoidikut, keevisõmblust, special paneelilõikurit, teravat peitlit, silencer sabatoru eemaldajat and cold peitlit. air consumption: 4 cfm Peitli handle dimensions: .401 "Parker Taper free speed: 4500 lööki per minute Intake dimensions: 1/4 "BSP net weight: 1,2 kg noise Power/pressure: 95/84dB (A) working pressur...
65,90€
ADD TO BASKET
Pneumatic impact hammers and nailers are widely used in construction, renovation, installation work, etc. Different nozzles ensure efficiency in the processing of various materials, including rust, paint and scale-covered surfaces. Ergonomic design, comfortable handle and low weight make work much easier. Advantages of the circuit breaker AD-324 include a strong metal body and a comfortable rubber...
71,90€
ADD TO BASKET
pneumatic hammer. weight [kg] - 1,5Õhuühenduse diameter (PT) ["/ mm] - 6.3 / 1/4 air toitevooliku diameter ( inner) ["/ mm] - 10/3/8 stroke frequency [min-1] - 3200Tööriistahoidja diameter [mm] - 10 maximum working pressure [MPa] - 0,70 recommended working pressure [MPa] - 0,62 required air flow (6,2 baari at) [l / min] - 560Helirõhk (ISO 15744) [dB (A)] - 96,9 ± 1,2Helivõimsus (ISO 15744) [dB (A...
76,20€
ADD TO BASKET
pneumatic hammer Heavy Duty - especially durable air impact hammer Functions Survevalu alumiiniumsulamist body hardened tööriistaterasest löökmehhanismiga inner parts tight tolerants ensures big torque and low Air Consumption middle tünniga hammer design with püstolkäepidemega handle Esiheitgaas Technical specifications impact per minute: 3200 lööki per minute stroke: 67 mm (2-5/8 ") chisel handle...
86,20€
ADD TO BASKET
use: seized injectors removal and šassii safe and fast repair with VIBRO SYSTEM technology lisavarustusega. VIBRO SYSTEM on kõrgsageduslike löökjõudude based based technology, which põhjustab corroded and carbon sidemete breakage. VIBRO SYSTEM suitable for perfectly aluminium, brass, cast iron and steel built-in teraselementide vabastamiseks. peamised tööparameetrid: Blows Per Minute: 2200 / min;...
87,40€
ADD TO BASKET
Available 1pc. peitli spindle: 10 mm number impacts 3200/min length: 175 mm
96,60€
ADD TO BASKET
(12 nõela; 28 mm; 5000 lööki / min) TOPTUL KAHC5013 is used surface ettevalmistamisel, especially rust-, paints-, dirt-, keevisräbu and many other deposits for removal. Eemaldava tihvti hammer telgjooneline design võimaldab to work difficulty accessible places and limited inside rooms. hammer Treated piston and cylinder ensure good durability and võimalikult with long tööea. pneumatic needles remo...
121,60€
ADD TO BASKET
Available 2pc. NEO 12 x 3 mm 14-031 pneumatic nõelahaamer rust and keevisõmbluste . on tool, which reaches 4000 Shock per minute. equipped with 12 with needle, which diameter on 3 mm, offers mugavat lõikamist and tõhusat metallitööd. hammer working pressure on 6,3 baari and average Air Consumption 125 l/min. tool on 1/4" plug. it is light (weight 1,3 kg) and handy. this tõestab end For demanding ülesannete puhul...
127,80€
ADD TO BASKET
pneumatic NÕELHAAMER 19 X 3 MM Brand: NEO TOOLS NEO 19 x 3 mm 19 x 3 mm 14-032 head nõelavasar rust and keevisõmbluste . on tool, which reaches 5000 Shock per minute. equipped with 19 with needle, which diameter on 3 mm, offers mugavat lõikamist and tõhusat metallitööd. hammer working pressure on 6,3 baari and average Air Consumption 85 l/min. tool on 1/4" plug. It's weight on 2,8 kg. this tõestab...
132,80€
ADD TO BASKET
Nõelvasar is intended for rust, dirt, paints and metals, stone and concrete strong saastumisest for cleaning. Nõelvasarat is used also seized threaded and sissetõmmatavate connections raputamiseks. Ta is ready to work nii autotööstuses and masinateeninduses and also in construction. it is aid, which eases significantly peamiste teenindusülesannete täitmist. Nõelvasar suitable for excellently nii v...
133,10€
ADD TO BASKET
versatile and tasuv fast cutting intended for general work Functions standardi .401 "round säär easy vahetushoidik accessories fast for changing pc number 8941071110 model CP7111 Power (džaulides) 7,2 džauli Löögid per minute 3000 Külmneeti capacity 6,4 mm 1/4 " Külmneeti capacity (steel) 4,8 mm 3/16 " hole 19 mm 3/4 " stroke 67 mm 2,63 " Peitli needikomplekti handle 10,2 mm 0,401 " handle round ...
133,30€
ADD TO BASKET
Available 1pc. Suruõhuvasar built-in toitekontrolleri, kiiruseregulaatori and quick-release chuck powerful suruõhuvasar. versatile tool sheet metal for drilling, injectors for removal etc. Löögikiirus: 2200 lööki per minute stroke lenght: 9,8 mm air consumption: 113 l/min air connector: 1/4" BSPT weight: 2570 g
138,60€
ADD TO BASKET
Available 2pc. special tool body for removal ASTA abil on two meetodi combination without body struktuuri segamata. Inertsiaalvasara combination tools poolt avaldatava vaakumiga võimaldab imeda iminappa surface märkimisväärse jõuga, which tugevdab and stabilizes contact car body and suction cup vahel. it type toiminguid is used mostly body- and värvitööstuses and this ensures fast and accurate work small mõlkide...
154,70€
ADD TO BASKET
Available 1pc. Product Description: - Ideal for removing rust and paint from rims, bodywork and narrow all-metal areas (not suitable for sheet metal) – Also suitable for loosening welding slag, paint, plaster and concrete and processing stones – Nails made of special steel have a long service life Special product features: – Small and compact, rod-shaped, consisting of twelve 3 mm needles – Rugged, all-metal bod...
155,10€
ADD TO BASKET
tool system blokeeritud connections, for example juhtvarda endings vabastamiseks.
164,10€
ADD TO BASKET
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
