cordless drill-screwdriver set in case 21v + blow bits

blow 21v cordless drill/driver - set in a case a versatile tool for assembling furniture, driving and removing screws and light drilling in wood and plastic. Adjustable torque, speed and direction make the tool suitable for every task, while cordless operation offers cordless freedom. The set includes two batteries, charger, drill bits, bits, flexible extension and a practical carrying case. The cordless drill can be used for, among other things: assembling and disassembling furniture, installing hinges, handles and fittings, screw strips and wooden elements, home and garage repairs, assembling shelves, cabinets and structures, driving and unscrewing screws, light drilling in wood, drilling in plastics, hobby and DIY work, carrying out smaller workshop work. Always use the correct drill bit for the screw, bolt, hole to be made and the type of material to be processed. The drill/driver does not start at full speed immediately. The speed can be gradually increased by pressing the trigger harder. This solution allows you to: place the bit exactly in the screw hole, start drilling without moving the drill suddenly, have better control over the screwing, adapt the working pace to the material being processed. When the trigger is released, the handle stops. The adjustment ring allows you to adjust the tightening force: lower value – for small screws and soft materials, higher value – for larger screws and harder materials, the highest position, marked with a drill symbol – for drilling. The correct torque setting allows you to work more precisely and reduces the risk of damaging the material or fastener. The drill-screwdriver allows you to choose the appropriate operating mode: screwdriving, drilling or impact drilling. The screwdriving mode is ideal for assembling furniture and screwdriving, the drilling mode makes drilling holes in wood, metal and plastic easier, while the impact function allows for more efficient work in harder materials, such as brick or lightweight concrete. This allows one device to replace several different tools and is suitable for a wide range of renovation, assembly and workshop applications. The set includes two 21 V lithium-ion batteries. The lithium-ion batteries allow the tool to be used without a power cord. Changing the battery is easy with the release buttons on the side. To install the battery, slide it into the guides until it clicks into place. Before starting work, it is worth checking that the battery is properly locked. The battery should be fully charged before first use. Technical data: device type: cordless drill/screwdriver voltage: 21 V battery type: Li-ion battery voltage: 21 V number of batteries included: 2 gripping range: 1–10 mm chuck type: keyless maximum torque: 50 Nm maximum rotation speed: up to 1500 rpm impact frequency given in the user manual: 25,000 approximate charging time: approximately 2–3 hours charger voltage: 230 V rotation direction: right / left accidental start protection: yes, switch position in the middle speed adjustment: yes, torque adjustment using the trigger: yes case: included set includes: blow cordless drill/screwdriver, 2 x 21 V battery, 230 V charger, screwdriver bit set, drill set, sockets / work sleeves, flexible extension, transport case.

Delivery method