Epoxy glue Universal epoxy adhesive 2x20ml
$3,90
$4,10
-5%
Arrives in 3-4wd
ADD TO BASKET
two-component epoksüliim with most of materials kõvade and very strong sidemete ..
this suitable for excellently bigger elements for repairing, if is needed pikemat ristsidumise time. glue is characterized by high chemical durability and durability ilmastikutingimustele, nii et it Can be used nii toas and also outside. after kõvenemist saab glue mechanically to be treated and to paint.
• creamy
• Waterproof
• for use inner- and outdoor
• durable impacts and hõõrdumisele
• is not elektrit juhtiv
• durable muutuvatele temperatures
• frost resistant
• durable agressiivsetele keemilistele mõjuritele (diluted happed and bases, most solvents) and töövedelikele
• after kuivatamist saab it mechanically to be treated (grinding, cutting, boring)
• can paint
• solvent free
materials: glass, ceramics, portselan, concrete, stone, metal, aluminium, rubber, wood, brick, gold, silver, steel, cap, puidupõhised materials, vahud, polüstüreen
Application näited:
• broken lillepotide, vaaside, portselanist and cheramic kujundite parandamine
• damaged majapidamistööriistade parandamine, for example haamervõlli, shovel installation
• köögiriistade, for example broken knife edge, rullkäepideme parandamine
• damaged furniture hinges liimimine
• broken aiaelementide repair
• treppide and floors cavities fill
• prototüüpvormide making
TINGIMUSED
• Working temperature
use at temperature over 10oC.
• resin (komponent A) and hardener vahelise keemilise reaktsiooni tulemusena ristsiduvad epoksüliimid
(komponent B) 1: 1 mahusuhtes, therefore on koostisosade thorough segamine very important.
use:
clean glued surfaces nii, et neis no oleks dirt neither määrdumisi (dust, grease). before epoksüliimide using karestage surfaces. this increases sidumispinda and thereby also sideme strengths. then clean fitted surfaces technical rasvaeemaldusvahendiga.
dry cleaned surfaces.
1. Punch pipe Membrane through cap tagaküljega.
2. squeeze Suitable for quantity components A and B mahusuhtega 1: 1 prescribed kaussi and mix koostisosi thoroughly lusikaga, up to saadakse triipudeta homogeenne mass.
Kui teil on kahtlusi, use väiksemat quantity komponenti B.
3. Apply manufactured mixture for one surface.
be sure that, et glue laotamine no kesta longer than glue serviceable life, st approximately 30 minutes after segamist.
4. push glued elements firmly together.
Kinnitage glued elements mõneks minutes. glue initial ristsidumise time on approximately 120 minutes.
5. Liite complete tugevuse to obtain leave glued element 24 tunniks.
Kuivamisaega you can lühendada, suunates warm air ühendusse, for example by using kuumaõhupuhurit.
NÕUANDED and MÄRKUSED
• don't use PP, PE and PTFE to connect.
• glue kõvenemise speed mõjutavad temperature and kasutatava ühendi quantity. don't use paksuseinaliste valude ., beacuse ristsidumisreaktsiooni ajal may temperature ületada 70oC.
• remove fresh stains alcohol, atsetooni or isopropüülalkoholiga.
Technical specifications
stand: epoksü composition (epoksüvaik + hardener)
glue paint: beige
connection color: beige
liquid
density: A: 1,3 g / cm3 , B: 1,7 g / cm3
Serviceable life after segamist: 30 min.
Esmane curing time: 120 minutes.
final kõvenemine: 24 hours
temperature resistance: -30 ° C ÷ 70 ° C
Kokkutõmbumine: <0,1%
Nihketugevus:
stainless steel 10 MPa
plastic 2–4 MPa
Murdetugevus:
steel-steel 15-20 MPa
storage
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• Kaitske moisture and from cold.
• glue you can to keep with other toodetega.
EAN-code 5902051000198
this suitable for excellently bigger elements for repairing, if is needed pikemat ristsidumise time. glue is characterized by high chemical durability and durability ilmastikutingimustele, nii et it Can be used nii toas and also outside. after kõvenemist saab glue mechanically to be treated and to paint.
• creamy
• Waterproof
• for use inner- and outdoor
• durable impacts and hõõrdumisele
• is not elektrit juhtiv
• durable muutuvatele temperatures
• frost resistant
• durable agressiivsetele keemilistele mõjuritele (diluted happed and bases, most solvents) and töövedelikele
• after kuivatamist saab it mechanically to be treated (grinding, cutting, boring)
• can paint
• solvent free
materials: glass, ceramics, portselan, concrete, stone, metal, aluminium, rubber, wood, brick, gold, silver, steel, cap, puidupõhised materials, vahud, polüstüreen
Application näited:
• broken lillepotide, vaaside, portselanist and cheramic kujundite parandamine
• damaged majapidamistööriistade parandamine, for example haamervõlli, shovel installation
• köögiriistade, for example broken knife edge, rullkäepideme parandamine
• damaged furniture hinges liimimine
• broken aiaelementide repair
• treppide and floors cavities fill
• prototüüpvormide making
TINGIMUSED
• Working temperature
use at temperature over 10oC.
• resin (komponent A) and hardener vahelise keemilise reaktsiooni tulemusena ristsiduvad epoksüliimid
(komponent B) 1: 1 mahusuhtes, therefore on koostisosade thorough segamine very important.
use:
clean glued surfaces nii, et neis no oleks dirt neither määrdumisi (dust, grease). before epoksüliimide using karestage surfaces. this increases sidumispinda and thereby also sideme strengths. then clean fitted surfaces technical rasvaeemaldusvahendiga.
dry cleaned surfaces.
1. Punch pipe Membrane through cap tagaküljega.
2. squeeze Suitable for quantity components A and B mahusuhtega 1: 1 prescribed kaussi and mix koostisosi thoroughly lusikaga, up to saadakse triipudeta homogeenne mass.
Kui teil on kahtlusi, use väiksemat quantity komponenti B.
3. Apply manufactured mixture for one surface.
be sure that, et glue laotamine no kesta longer than glue serviceable life, st approximately 30 minutes after segamist.
4. push glued elements firmly together.
Kinnitage glued elements mõneks minutes. glue initial ristsidumise time on approximately 120 minutes.
5. Liite complete tugevuse to obtain leave glued element 24 tunniks.
Kuivamisaega you can lühendada, suunates warm air ühendusse, for example by using kuumaõhupuhurit.
NÕUANDED and MÄRKUSED
• don't use PP, PE and PTFE to connect.
• glue kõvenemise speed mõjutavad temperature and kasutatava ühendi quantity. don't use paksuseinaliste valude ., beacuse ristsidumisreaktsiooni ajal may temperature ületada 70oC.
• remove fresh stains alcohol, atsetooni or isopropüülalkoholiga.
Technical specifications
stand: epoksü composition (epoksüvaik + hardener)
glue paint: beige
connection color: beige
liquid
density: A: 1,3 g / cm3 , B: 1,7 g / cm3
Serviceable life after segamist: 30 min.
Esmane curing time: 120 minutes.
final kõvenemine: 24 hours
temperature resistance: -30 ° C ÷ 70 ° C
Kokkutõmbumine: <0,1%
Nihketugevus:
stainless steel 10 MPa
plastic 2–4 MPa
Murdetugevus:
steel-steel 15-20 MPa
storage
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• Kaitske moisture and from cold.
• glue you can to keep with other toodetega.
EAN-code 5902051000198
Technicqll
technicqll is a polish company that has specialized in the production of high-quality adhesives, sealants and chemical preparations since 1985. Their product range includes epoxy, cyanoacrylate and solvent-based adhesives, silicones, sealants, lubricants and cleaning and maintenance products, designed for both home use and professional applications. technicqll products are known for their reliability and durability, providing solutions for joining and repairing various materials, such as metal, wood, plastic, ceramics and glass. The company's goal is to provide its customers with a "technical first aid kit" that will help them quickly and efficiently solve various repair and maintenance tasks.
Delivery method
The product delivery is not available to your selected destination.
$16,10
$17,10
-6%
ADD TO BASKET
Arrives in 3-4wd
$22,90
$24,30
-6%
ADD TO BASKET
Arrives in 3-4wd
$16,70
$17,70
-6%
ADD TO BASKET
Arrives in 3-4wd
$7,30
ADD TO BASKET
Arrives in 3-4wd
Epoxy adhesives, epoxy resins and their use
Whether you are working with fiberglass, wood, cement, metal or plastic, epoxies are the perfect choice when you need an extra strong bond. Once you know how to choose the right epoxy resin, aka epoxy resin or epoxy glue (epoxy glue), for the material you're working with, you can confidently move forward with your project. This guide will help you understand how to use epoxy correctly so you can get the best results for your project.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
