külmkeevitus epoxy 2X 28G PRO-SEAL
$9,70
Arrives in 3-4wd
ADD TO BASKET
Pro Seal WELD Quick Cold Welding Compound on two part epoksüliim, which are created against pidama temperatures up to +149 °C. tolerates puurimist, töötlemist or grinding. typical rakendused hõlmavad for transmission gearbox and rear jaotuskasti etc cracks parandamist, kollektorite, radiators õmbluste, valuvead etc for repairing.
replaces hot keevitust.
Features - liquid product:
Epoksüvaik paint: color dark grey or black
Epoksü hardener: grey paste
viscosity, CP:
Epoksüvaik: 600,000
Epoksü hardener: 500,00
ratio 1: 1 võrdsetes osades
Features – SEGATUNA
Serviceable life 4 minutes
full kõvenemine 4-6 minutes
maximum gap .25 "
Tensile Strength ASTM D638: 2040 psi (+-10%)
Tensile Strength ASTM D 1002, steel / steel 1072 psi (+-10%)
working temperature interval -54C up to +121C
hardness, Shore D 73:
73 (after 60-minutist kõvenemist)
83 (after complete kõvenemist)
KASUTAMIS instructions
1. surfaces peaksid be clean and dry, oil- and rasvavabad.
2. Parimate tulemuste to achieve karestage surfaces smirgellapi or sandpaper.
remove entire dust.
3. mix võrdses koguses vaiku and hardener approximately 1 minutes thoroughly.
4. Apply nii surfaces and also kokkuliimitavale both part.
5. remove excessive epoxy immediately denatured piiritusega.
6. Fikseerumine 60 minutes, full kõvenemine 12–24 in hour.
replaces hot keevitust.
Features - liquid product:
Epoksüvaik paint: color dark grey or black
Epoksü hardener: grey paste
viscosity, CP:
Epoksüvaik: 600,000
Epoksü hardener: 500,00
ratio 1: 1 võrdsetes osades
Features – SEGATUNA
Serviceable life 4 minutes
full kõvenemine 4-6 minutes
maximum gap .25 "
Tensile Strength ASTM D638: 2040 psi (+-10%)
Tensile Strength ASTM D 1002, steel / steel 1072 psi (+-10%)
working temperature interval -54C up to +121C
hardness, Shore D 73:
73 (after 60-minutist kõvenemist)
83 (after complete kõvenemist)
KASUTAMIS instructions
1. surfaces peaksid be clean and dry, oil- and rasvavabad.
2. Parimate tulemuste to achieve karestage surfaces smirgellapi or sandpaper.
remove entire dust.
3. mix võrdses koguses vaiku and hardener approximately 1 minutes thoroughly.
4. Apply nii surfaces and also kokkuliimitavale both part.
5. remove excessive epoxy immediately denatured piiritusega.
6. Fikseerumine 60 minutes, full kõvenemine 12–24 in hour.
Delivery method
The product delivery is not available to your selected destination.
$16,10
$17,10
-6%
ADD TO BASKET
Arrives in 3-4wd
$22,90
$24,30
-6%
ADD TO BASKET
Arrives in 3-4wd
$7,30
ADD TO BASKET
Arrives in 3-4wd
Epoxy adhesives, epoxy resins and their use
Whether you are working with fiberglass, wood, cement, metal or plastic, epoxies are the perfect choice when you need an extra strong bond. Once you know how to choose the right epoxy resin, aka epoxy resin or epoxy glue (epoxy glue), for the material you're working with, you can confidently move forward with your project. This guide will help you understand how to use epoxy correctly so you can get the best results for your project.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
