epoxy glue 4 min, gray 34ml

4 min epoxy plus 34ml - gray
· multi-purpose glue for various construction, repair and repair works
· suitable for gluing as well as, for example, surface putty, protective layer or filler
· easy to use
· does not shrink or expand during curing
· hardens-hardens completely - does not remain so-called chewy
· resistant to water, solvent, weak acids, alkali, oil, gasoline
· withstands temperatures between -40°c and +100°c and pressure (up to approx. 9000psi)

brief description
two-component e-glue that glues and chemically binds various metals (steel, brass, copper, bronze, iron, etc.), glass, stone, ceramics, wood, most rigid plastics, various polymeric and other materials.
hardened adhesive mass can be filed, drilled, sanded and painted over.
not suitable for pe, pp and ptfe plastics.

areas of use
epox plus has a very wide field of application. mainly used in various construction, repair and repair works, where a rigid, solid and very strong adhesive connection is primarily required. epox plus is ideal for gluing various rigid materials, protecting surfaces, filling and gluing holes and cracks, etc. suitable for small consumers at home as well as for smaller industries.
suitable for indoor and outdoor use.
*home *garden *construction *repair and finishing *cars *watercraft *agricultural machinery
*mototechnics *crafts *electronics *furniture *fishing supplies (wobbler lures, rods), etc.

manual
· the surfaces to be glued must be clean, dry and oil-free! it is recommended to lightly roughen the surfaces beforehand, e.g. with fine sandpaper. remove the dust.
· an equal amount (volume ratio 1:1) of resin (tube a) and hardener (tube b) must be thoroughly mixed together. use the included spatula to mix!
· apply the adhesive mixture to the surfaces and immediately remove the excess mixture.

epolyim dries in approx. 4-5 min, complete hardening within 24h (at approx. +21°c).
does not shrink or swell when drying. fully cured adhesive mass is non-conductive.


technical specifications
the product consists of two components (part a - resin and part b - hardener) which are mixed
together in equal volume.

operating temperature: -10°c to +100°c

temperature tolerance: -40°c to +100°c
hardness (shore d):
pressure resistance: up to approx. 9000psi
electrical conductivity, current resistance:
liquid / liquid
black / white
1.70 ± 0.10 / 1.60 ± 0.10
40,000 - 80,000 cps / 70,000 - 110,000 cps

approx 150k cps
about 3-5 minutes after mixing
approx. 4-5 minutes after application
within 24 hours

non-conductive, current resistance >105 ωcm
* application time, initial drying time and complete curing time depends on temperature, air humidity and the amount of mixed adhesive mass.

Delivery method

The product delivery is not available to your selected destination.