534 carbon putty 1000g+hardener

Carbon fiber reinforced two-component fiberglass putty.
Can be applied directly to iron, steel, aluminum, galvanized substrates, GRP and wood.
ideal for smoothing cracks, small gaps and perforations to prevent corrosion.
Unlike conventional fiberglass putty, Chamäleon Carbon putty contains extremely strong carbon fibers, which give it excellent stability and strength.

Carbon fiber reinforced 2k putty. Carbon fiber is lighter and easier to apply than regular fiberglass putty. The product is perfect for bridging cracks, filling small gaps and perforations caused by corrosion.
 easy to sand
 light weight
 suitable for modeling and rc repair

areas of use:
 zinc
 group
 iron
 steel
 wood
 aluminum and its alloys

base: polyester resin
Density at 20°C: 1.592 g/cm³
hardener 1.15 g/cm³

painting preparation process
hardener: hardener p
Mixing ratio (by weight): 100:2
Do not use more than 3% hardener p! Under- or overdosing hardener can cause stains on the finish coat.
pot life at 20 °C: 4 - 5 min
application process
Before use, carefully read and follow the warning texts on the label!

processing conditions:
Use only in a well-ventilated area with plenty of fresh air. The processing temperature must be at least +12 °C and the max. humidity should not exceed 80%. Polyester-based body filler does not harden at temperatures below +10 °C.
drying
grinding object temperature 20 °c 25 min
object temperature 60 °c 10 min

processing tips
 The substrate must be clean, dry and grease-free.
 Sand the surfaces lightly. Remove loose/old paint and primer layers.
 Before each step, clean and degrease the entire surface to be painted.
 Clean the defective areas from metal and dry sand with sandpaper p80/150.
 mix the putty material thoroughly with the hardener.
 after drying, use sandpaper p80/240 for dry sanding.
 Before applying the filler, sand the entire surface with dry sandpaper p240/360 to a matte finish.
 When filling non-ferrous metals (e.g. aluminum, galvanized surfaces), it is recommended to apply a primer coat of Chamäleon Epoxy Primer before applying the putty to ensure optimal adhesion.
 Putty can only be sanded dry.

attention
 do not apply to thermoplastic or acidic products (wash primer).
 do not apply topcoats without first insulating the surface with chamäleon 1k or 2k primer.
 do not put the mixed material back into the jar.
 Clean tools immediately after use with nitro liquid if necessary.

Chamäleon

German manufacturer of high-quality putty products. the chameleon mark was first introduced in 1965 in schwerte.

at that time chamäleon putty products were mainly produced for the German speaking market and represented the highest quality that professional users could count on. In 2002, it was decided to expand the range of putty products and start focusing on the international market. to realize this, the chamäleon brand was commissioned into a separate company under qualified management.

all putty products were still made in schwerte so that the company could move to foreign markets with excellent "made in germany" quality products. heidelberg, located in the rhine-neckar triangle, was chosen as the headquarters of the new company because of its infrastructure and ideal conditions for new expansion strategies.

chamäleon gmbh was able to successfully implement the set goals and was able to establish itself internationally with a wide range of car finishing products. the key to the success of the young company is to offer "made in Germany" quality products at very competitive prices and to offer the highest level of customer service. chamäleon gmbh works according to international quality standards, including the well-known iso 9001: 2015. the company received the strain thüringen certificate, which is proof of its continued commitment to quality and customer satisfaction.

Delivery method