aluminum putty 0.5kg + hardener gray
$7,90
$8,30
-5%
Arrives in 3-4wd
ADD TO BASKET
general properties: for car repairs, engine building and hobby work. wherever you want to fill a large area. applicable to galvanized sheets, aluminum and its alloys, iron, steel plates, wood, concrete. for filling and leveling holes and stabilizing thin areas. chamaeleon aluminum polyester putty is a two-component polyester filling putty with medium elasticity, high reactivity, amino-pre-accelerated polyester resin as a mixture with various mineral, environmentally friendly fillers and aluminum pigments.
quality and features:
* ease of work
* high elasticity
* highly thixotropic, therefore very easy to spread and pore-free application
* easy to sand
* very good retention
* asbestos and silicone free
* short curing time
* resistant to weak acids and bases, propellants, solvents, water and de-icing salt
technical characteristics:
base: polyester resin with mineral fillers and aluminum pigments
color: gray
odor: styrene
consistency: soft, thixotropic, pasty
pot life/working time at 20°C: approx. 4 minutes
operating temperature: min. 12 ° c
Drying time (at 20°C, 50% relative humidity):
can be sanded after approx. 20–30 minutes
Hardener addition: 2 - 4% (optimal mixture 2.5%)
temperature resistance
cured material: 120°C
usage:
Before use, carefully read the warning texts on the label and follow them!
* the area you want to repair should be rust-free, clean, dry, grease-free and sanded.
* Take the required amount of putty from the can and mix it well with the appropriate amount of hardener.
* Apply the mixed material to the desired layer thickness.
* Clean tools immediately after use, if necessary with nitro thinner.
* Do not return mixed putty to the can.
* After approx. 20–30 minutes, the repaired area can be drilled, sanded, sawed, rasped and painted.
at that time chamäleon putty products were mainly produced for the German speaking market and represented the highest quality that professional users could count on. In 2002, it was decided to expand the range of putty products and start focusing on the international market. to realize this, the chamäleon brand was commissioned into a separate company under qualified management.
all putty products were still made in schwerte so that the company could move to foreign markets with excellent "made in germany" quality products. heidelberg, located in the rhine-neckar triangle, was chosen as the headquarters of the new company because of its infrastructure and ideal conditions for new expansion strategies.
chamäleon gmbh was able to successfully implement the set goals and was able to establish itself internationally with a wide range of car finishing products. the key to the success of the young company is to offer "made in Germany" quality products at very competitive prices and to offer the highest level of customer service. chamäleon gmbh works according to international quality standards, including the well-known iso 9001: 2015. the company received the strain thüringen certificate, which is proof of its continued commitment to quality and customer satisfaction.
quality and features:
* ease of work
* high elasticity
* highly thixotropic, therefore very easy to spread and pore-free application
* easy to sand
* very good retention
* asbestos and silicone free
* short curing time
* resistant to weak acids and bases, propellants, solvents, water and de-icing salt
technical characteristics:
base: polyester resin with mineral fillers and aluminum pigments
color: gray
odor: styrene
consistency: soft, thixotropic, pasty
pot life/working time at 20°C: approx. 4 minutes
operating temperature: min. 12 ° c
Drying time (at 20°C, 50% relative humidity):
can be sanded after approx. 20–30 minutes
Hardener addition: 2 - 4% (optimal mixture 2.5%)
temperature resistance
cured material: 120°C
usage:
Before use, carefully read the warning texts on the label and follow them!
* the area you want to repair should be rust-free, clean, dry, grease-free and sanded.
* Take the required amount of putty from the can and mix it well with the appropriate amount of hardener.
* Apply the mixed material to the desired layer thickness.
* Clean tools immediately after use, if necessary with nitro thinner.
* Do not return mixed putty to the can.
* After approx. 20–30 minutes, the repaired area can be drilled, sanded, sawed, rasped and painted.
Chamäleon
German manufacturer of high-quality putty products. the chameleon mark was first introduced in 1965 in schwerte.at that time chamäleon putty products were mainly produced for the German speaking market and represented the highest quality that professional users could count on. In 2002, it was decided to expand the range of putty products and start focusing on the international market. to realize this, the chamäleon brand was commissioned into a separate company under qualified management.
all putty products were still made in schwerte so that the company could move to foreign markets with excellent "made in germany" quality products. heidelberg, located in the rhine-neckar triangle, was chosen as the headquarters of the new company because of its infrastructure and ideal conditions for new expansion strategies.
chamäleon gmbh was able to successfully implement the set goals and was able to establish itself internationally with a wide range of car finishing products. the key to the success of the young company is to offer "made in Germany" quality products at very competitive prices and to offer the highest level of customer service. chamäleon gmbh works according to international quality standards, including the well-known iso 9001: 2015. the company received the strain thüringen certificate, which is proof of its continued commitment to quality and customer satisfaction.
Delivery method
The product delivery is not available to your selected destination.
$3,50
ADD TO BASKET
Arrives in 3-4wd
Car paint thickness gauge and car paint layers
A paint thickness gauge (or paint depth gauge) is used to measure the thickness of a vehicle's paint layer to determine whether the car has received a new paint coating after leaving the factory (either due to a previous accident, paint damage, etc.) or not. ). The repainted body part gives a higher reading than the part wearing the original paint.
... More...
Epoxy adhesives, epoxy resins and their use
Whether you are working with fiberglass, wood, cement, metal or plastic, epoxies are the perfect choice when you need an extra strong bond. Once you know how to choose the right epoxy resin, aka epoxy resin or epoxy glue (epoxy glue), for the material you're working with, you can confidently move forward with your project. This guide will help you understand how to use epoxy correctly so you can get the best results for your project.
... More...
Putties and their use
Car body damage is very common. All it takes is a stone thrown from under the tire, careless parking, a minor collision or a scratch. Larger damages may require the help of a professional, but with smaller defects we can handle the corresponding putty ourselves.
... More...
RAL color chart
RAL is a European color matching system that defines the colors of paint, coatings, and plastics. The RAL color standard is maintained by the RAL Deutsches Institut für Gütesicherung und Kennzeichnung. “RAL” is an abbreviation for “Reichs-Ausschuß für Lieferbedingungen und Gütesicherung”.
... More...
Information about painting and colors
General information and frequently asked questions about painting and spray paints. The article contains information about Motip-Duplicolor products, information about products from other brands may differ from the information provided here depending on the specifics of the product.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
