AUDI A6 C8 (4A2) 45 TFSI Mild Hybrid quattro (180kW / 245hp) 2018 - ...
| Material | Rubber |
| Exhaust System | for rear muffler, for Exhaust Pipe |
| Fitting Position | Front, after soot particulate filter |
| Quantity required | 2, 2 |
| Block Separation | |
| Material | Rubber |
| Exhaust System | for rear muffler |
| Fitting Position | Rear |
| Quantity required | 2 |
| Exhaust System | for front muffler |
| Fitting Position | Inlet |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Exhaust System | for rear muffler, for Exhaust Pipe |
| Fitting Position | Front, after soot particulate filter |
| Quantity required | 2, 2 |
| Block Separation | |
$2,40
$2,80
-15%
ADD TO BASKET
| Material | Rubber |
| Exhaust System | for rear muffler, for Exhaust Pipe |
| Fitting Position | Front, after soot particulate filter |
| Quantity required | 2, 2 |
| Block Separation | |
$2,50
$3,00
-17%
ADD TO BASKET
| Fitting Position | Exhaust Pipe at exhaust turbocharger |
| Fitting Position | engine sided |
| Material | Sheet Steel |
| for OE No. | 8K0 253 115J |
| Number of flange connections | 3 |
$3,20
$3,80
-16%
ADD TO BASKET
| Material | Stainless Steel |
| Fitting Position | after catalytic converter |
| Fitting Position | Exhaust Pipe at exhaust turbocharger, before catalytic converter |
| Material | Sheet Steel |
| Fitting Position | engine sided |
| Number of flange connections | 4 |
| for OE No. | 8K0 253 115L |
$4,10
$4,80
-15%
ADD TO BASKET
| Number of mounting bores | 3 |
| Fitting Position | after catalytic converter |
$4,30
$5,10
-16%
ADD TO BASKET
| Number of mounting bores | 4 |
| Fitting Position | Exhaust Pipe at exhaust turbocharger |
| Gasket Design | Steel |
$4,40
$5,10
-14%
ADD TO BASKET
| Pipe Connector | Double Clamp |
| Ø | 65mm |
| Length | 90mm |
| Exhaust System | for rear muffler |
| Fitting Position | Intake Side |
| Material | Rubber/Metal |
| Exhaust System | for front muffler |
$5,20
$6,10
-15%
ADD TO BASKET
| Number of mounting bores | 4 |
| Fitting Position | Exhaust Pipe at exhaust turbocharger |
| Gasket Design | Multilayer Steel (MLS) |
$5,40
$6,40
-16%
ADD TO BASKET
| Pipe Connector | Double Clamp |
| Ø | 65mm |
| Length | 90mm |
| Material | Stainless Steel |
| Exhaust System | for rear muffler |
| Fitting Position | Intake Side |
$7,30
$8,50
-15%
ADD TO BASKET
| Thickness | 0.4mm |
| Inner Diameter | 115mm |
| Outer Diameter | 120mm |
| Engine Code | DLHA, DKNA |
$8,60
$10,20
-16%
ADD TO BASKET
| Pipe Connector | Double Clamp |
| Ø | 65mm |
| Length | 90mm |
| Material | Stainless Steel |
| Exhaust System | for rear muffler |
| Fitting Position | Intake Side |
$12,60
$14,80
-15%
ADD TO BASKET
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
