match m 2.1 amp

Available 1pc. excellent sound quality with maximum efficiency

m 2.1amp is the ultimate compact power source for 1- or 2-channel applications with limited installation space. whether a 2-ohm stable mono subwoofer amplifier or even a particularly efficient stereo amplifier for driving passive component systems or power-hungry subwoofers - despite its minimalist dimensions, this highly efficient speaker delivers up to 700W of output power. these amazing figures in such a small space are the result of audiotec fischers patented hd class technology, which ensures unsurpassed efficiency and therefore minimal heat dissipation.

power on demand

the switchable mono/stereo function makes the m 2.1amp a multi-functional tool.
in mono mode it is ideal for driving powerful subwoofers with a minimum impedance of 2 ohms - in stereo mode it is the perfect choice for driving powerful front or rear speaker systems.
thanks to its high-resolution audio bandwidth, the m 2.1amp sound is gigantic in performance and leaves nothing to be desired.

maximum flexibility in minimum space

in modern vehicles, the space available for audio upgrades is increasingly limited and presents new challenges for installers, especially in multi-device setups. thanks to their minimal dimensions, match micro amplifiers like the m 2.1 amp can be installed in even the most difficult places. conditions and open up new, unimaginable possibilities when choosing an installation site and therefore enable hidden installation concepts.

characteristics
a highly efficient HD-class amplifier with an exceptional power-to-size ratio
mono mode: 1 x 350 watts rms @ 2 ohms - perfect for driving powerful subwoofers with 2 ohm single voice coil (svc2) or 4 ohm dual voice coil (dvc4)
stereo mode: 2 x 170 watts rms @ 4 ohms - perfect for driving powerful front and rear speaker systems or powerful front/underseat subwoofers with a 4 ohm single voice coil (svc4)
small size for hidden installation concepts
excellent sound quality with max. signal-to-noise ratio 108 db and thd 0.02 %
2-channel rca / rca input
switch "ground input" to avoid ground loops.
perfect combination with match upgrade dsp amplifiers
special features:
mono / stereo mode
m 2.1amp amplifier is equipped with mono / stereo mode. this allows the amplifier to be configured as a 2-ohm mono amplifier or a 4-ohm 2-channel amplifier, depending on the application. in both operating modes, the m2.1 amp offers an extended audio frequency response of over 40khz thanks to its hires capability to ensure unsurpassed sound quality.

hd class technology
m 2.1amp combines the advantages of class h technology with the principle of a class d amplifier. resulting in unmatched efficiency that easily surpasses any conventional class-d amplifier. by varying the internal supply voltage depending on the amplitude of the input signals to the amplifier, the no-load losses are greatly reduced and the overall efficiency is close to maximum at all times.

start-stop option
match m 2.1amp switched power supply ensures constant internal supply voltage even when battery voltage drops to 6 volts during engine cranking.


data

power rsmono mode stereo mode
- @ 4 ohms 1 x 210 watts 2 x 170 watts
- @ 2 ohms 1 x 350 watts -
- @ 1 ohm--
- bridged @ 4 ohms--
- bridged @ 2 ohms--
max output power (mono mode)
up to 430w rms @ 2 ohms
amplifier technology class hd
inputs 2 x rca / cinch
1 x remote input
input sensitivity rca / cinch 1 - 6 volts
input impedance rca / cinch10 kohms
input resistance high level
outputs 2 x speaker output
1 x remote control
output voltage rca / cinch-
signal converter for digital input -
frequency response 10 hz - 40,000 hz
bass boost -
high pass
low pass
bandpass
subsonic speed-
phase
slope high/low pass
slope subsonic / low pass
signal-to-noise ratio digital input-
signal-to-noise ratio analog input 108 db (a-weighted)
distortion (thd) 0.02 %
damping factor 100
operating voltage 10.5-17 volts (max 5 s to 6 volts)
idle current 500 ma
fuse 1 x 30 a lp-mini fuse (aps)
nominal power dc 12 v ⎓ 40 a max.
additional features variable input sensitivity, fully stabilized internal power supply, start-stop capability, ground switch, mono / stereo mode
dimensions (hxhxs)
35 x 85 x 110 mm /
1.34 x 3.35 x 4.33 inches.

Delivery method