relay Victron Energy BatteryProtect 12/24V-65A
Goods available only in e-shop
51,80€
Delivery: home 3-4wd
ADD TO BASKET
Available 2pc. BatteryProtect ühendab battery open ebaolulistest koormustest before It's complete tühjenemist (which kahjustaks batteries) or before, kui sellel pole engine for starting enough force.
BatteryProtect on ühesuunaline device. this suudab käsitleda power only in one direction, therefore kas with current for a load or with current laadijast, but not mõlemat power at once. in addition saab current voolata only akuklemmist laadimisterminali. load using korral connects battery battery pin, with charger using korral aga charger battery pin.
7-segmendilise LED-display: easy to adjust
BatteryProtect ühendab battery open ebaolulistest koormustest before It's complete tühjenemist (which kahjustaks batteries) or before, kui sellel pole engine for starting enough force.
12/24V automatic ulatus
BatteryProtect Detects automatically System voltage
Programmeerimine on made easy
BatteryProtecti can adjust mitmel erineval pingel in/out lülitama.
Seitsme segmendi display indicates, milline setting on chosen.
Eriseade Lithium Ion Batteries .
Selles mode saab BatteryProtecti juhtida VE.Bus BMS-each.
Note: BatteryProtecti Can be used also charging katkestajana Battery charger and liitiumioonaku vahel. Vt ühendusskeemi juhendist.
very low Power Consumption
it is important Lithium Ion Batteries puhul, especially after madalpinge väljalülitamist.
Lisateabe to obtain vaadake our liitiumioonaku andmelehte and VE.Bus BMS-i juhendit.
Ülepingekaitse
Tundlike loads kahjustamise to avoid ülepingest, katkestatakse load always, kui alalispinge exceeds 16 V or 32 V.
Süütekindel
Pole relay, only MOSFET-Switches and therefore also sparks.
Hiline häireväljund
Häireväljund aktiveerub, kui battery voltage langeb alla preconfigured for separating level more than 12 seconds. therefore no aktiveeri engine starting häiret. Häireväljund on lühisekindel
open kollektori output negatiivsele (Minus) siinile, max. current 50 mA. Häireväljundit is used usually sound signal, LED-light or relay for activation.
Viivitatud load lahtiühendamine and viivitatud taasühendamine
load katkestatakse 90 seconds after häire aktiveerimist. Kui battery voltage rises It's aja jooksul again ühendusläveni (for example after engine starting), siis load no lahutata.
load black be connected again 30 seconds after it, kui battery voltage on tõusnud preconfigured taasühendamispingest kõrgemale.
Tooteleht
BatteryProtect on ühesuunaline device. this suudab käsitleda power only in one direction, therefore kas with current for a load or with current laadijast, but not mõlemat power at once. in addition saab current voolata only akuklemmist laadimisterminali. load using korral connects battery battery pin, with charger using korral aga charger battery pin.
7-segmendilise LED-display: easy to adjust
BatteryProtect ühendab battery open ebaolulistest koormustest before It's complete tühjenemist (which kahjustaks batteries) or before, kui sellel pole engine for starting enough force.
12/24V automatic ulatus
BatteryProtect Detects automatically System voltage
Programmeerimine on made easy
BatteryProtecti can adjust mitmel erineval pingel in/out lülitama.
Seitsme segmendi display indicates, milline setting on chosen.
Eriseade Lithium Ion Batteries .
Selles mode saab BatteryProtecti juhtida VE.Bus BMS-each.
Note: BatteryProtecti Can be used also charging katkestajana Battery charger and liitiumioonaku vahel. Vt ühendusskeemi juhendist.
very low Power Consumption
it is important Lithium Ion Batteries puhul, especially after madalpinge väljalülitamist.
Lisateabe to obtain vaadake our liitiumioonaku andmelehte and VE.Bus BMS-i juhendit.
Ülepingekaitse
Tundlike loads kahjustamise to avoid ülepingest, katkestatakse load always, kui alalispinge exceeds 16 V or 32 V.
Süütekindel
Pole relay, only MOSFET-Switches and therefore also sparks.
Hiline häireväljund
Häireväljund aktiveerub, kui battery voltage langeb alla preconfigured for separating level more than 12 seconds. therefore no aktiveeri engine starting häiret. Häireväljund on lühisekindel
open kollektori output negatiivsele (Minus) siinile, max. current 50 mA. Häireväljundit is used usually sound signal, LED-light or relay for activation.
Viivitatud load lahtiühendamine and viivitatud taasühendamine
load katkestatakse 90 seconds after häire aktiveerimist. Kui battery voltage rises It's aja jooksul again ühendusläveni (for example after engine starting), siis load no lahutata.
load black be connected again 30 seconds after it, kui battery voltage on tõusnud preconfigured taasühendamispingest kõrgemale.
Tooteleht
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
