active foam nanofactor 1l

active foam for washing vehicles, nanofactor

highly effective active foam for washing vehicles, based on surface go nanotechnology, which is highly effective. the carefully chosen composition of the product allowed us to achieve a very strong, single-phase foam for basic washing with softening properties. it can also be used as a pre-wash. can be used in both pressure washing and touchless washing. thanks to the optimal ph range of 12.50, the product is safe for human skin and car paint. in addition, anti-corrosion additives protect the paint coating from damage.

How to use?
the tool black be diluted with water. depending on the device used, the ratio of water to product is different. when using sprays, the optimal ratio is 1:50 or 1:100. 1:5 or 1:10 for foam guns. when using foam generators or low-pressure sprayers, a ratio of 1:50 or 1:100 is recommended.

then apply the product to the body with a foam gun or spray and wait a few minutes for the product to soften the dirt. after this time, foam and dissolved dirt will start to flow out of the car. do not let the foam dry. rinse the remaining foam thoroughly with pressurized water.

where to use?
the tool is recommended to be used in touch-free car washes and during pressure washing using the foam and drop method. the ease of use of the product allows it to be used even at home. also suitable for use in special car washes and truck stands.

type:
concentrate

efficiency:
1l of concentrate gives up to 100l of solution,
car wash from PLN 0.72

dosage:
sprays: 1:50-1:100
foam guns: 1:5 – 1:10

safety:
does not contain nta - does not contain carcinogenic substances
does not contain solvents
works in the ph range - about 12.50