444 lot white 3.6l

2K Primer 4:1 is a quick-sanding 2K primer surface layer with high filling capacity, anti-corrosion protection and good adhesion properties. Developed for car refinishing, also suitable for partial surface filling
(Spot repair) without dents or visible marks on the outer rim.

Bulk quantity: 5.0 - 6.0 m²/l
Mixing ratio:
by volume (varnish: hardener)
Hardener 288 - 4:1

Pot life at 20 °C: 2 hours with hardener 288
Solvent: 5-10% universal solvent
Spray viscosity 4 mm DIN: 30 - 55 s, Gravity spray gun

Flash time
5 - 8 minutes between coats
Before drying in the oven for 10-15 minutes

the cooking temperature black be at least +10 °C and max. humidity should not exceed 80%.

Drying:
Object temperature 20 °C -- -- -- 3 - 5 h --
Object temperature 60 °C -- -- -- 30 - 40 min --
Infrared drying short wave -- -- -- 8 min --
Infrared drying medium wave -- -- -- 10 - 15 min --

Processing instructions: Prime bare metal surfaces beforehand with an adhesion promoter (e.g. Wash Primer 2:1). Small iron and steel surfaces, no larger than the hand, can be painted directly over. For a single-layer topcoat, use sandpaper P 400 for dry sanding or P 600 for wet sanding. For two-layer topcoat, we recommend using sandpaper P 500/600 for dry sanding and P 800/1000 for wet sanding. Do not apply to thermoplastic substrates.
The substrate black be clean, dry and free of grease. Lightly sand the surfaces. Remove unhardened old paint and primer layers.

It is necessary to use hardener S120-12884

• 2K-HS primer with high filling capacity


• Quickly sandable


• Excellent grip


• High corrosion protection


• Easy and safe use