one-component plastikukrunt 1K PRIMER 1L
Goods available only in e-shop
17,90€
Delivery: home 3-4wd
ADD TO BASKET
ready to use 1K primer car for repair. this is intended for specially for plastic parts . nakkumise soodustajaks.
Excellent adhesiveness plastidega.
very short kõvenemisaeg.
color – shoulder, clear.
Läikeaste – semigloss.
surface ETTEVALMISTAMINE
it is intended to to apply mitmesugustest plastidest, especially polypropylene, PP-st and their segudest manufactured surfaces.
Note: Kate no paranda adhesion polüetüleenist, PE-st manufactured surfaces.
for painting intended surface black carefully wash detergent rasvatustada and prior abrasiivse fabric wipe. then black it again to clean wash detergent, rinse with water and to dry with air.
before värvimistöödega alustamist is recommended elements kuumutada up to a temperature 500 C, which helps to remove It's from surface silikoonühendeid.
to use
for cars for repair interlayer, which improves covers and paints adhesion plastic manufactured surface.
spraying viscosity 10÷12 seconds 20oC at
product Delivered ready to use kujul.
layers number: 1÷2 layers
with dry layer thickness: u. 15 μm
RP relva parameetrid:
head: 1,2÷1,4 mm, pressure: 2,0÷2,2 baari
HVLP gun parameetrid:
head: 1,3÷1,4 mm; pressure: 2,0 baari
Aurustumise time
layers vahel u. 5 minutes
before ülekatmist u. 10 minutes
evaporation time depends temperature and layers arvust
don't lihvige!
1K Plastic Primer may to cover straight:
2K akrüültäiteained.
2K akrüülist pealislakid.
1K aluslakid.
1K paint and alusvärvid
Excellent adhesiveness plastidega.
very short kõvenemisaeg.
color – shoulder, clear.
Läikeaste – semigloss.
surface ETTEVALMISTAMINE
it is intended to to apply mitmesugustest plastidest, especially polypropylene, PP-st and their segudest manufactured surfaces.
Note: Kate no paranda adhesion polüetüleenist, PE-st manufactured surfaces.
for painting intended surface black carefully wash detergent rasvatustada and prior abrasiivse fabric wipe. then black it again to clean wash detergent, rinse with water and to dry with air.
before värvimistöödega alustamist is recommended elements kuumutada up to a temperature 500 C, which helps to remove It's from surface silikoonühendeid.
to use
for cars for repair interlayer, which improves covers and paints adhesion plastic manufactured surface.
spraying viscosity 10÷12 seconds 20oC at
product Delivered ready to use kujul.
layers number: 1÷2 layers
with dry layer thickness: u. 15 μm
RP relva parameetrid:
head: 1,2÷1,4 mm, pressure: 2,0÷2,2 baari
HVLP gun parameetrid:
head: 1,3÷1,4 mm; pressure: 2,0 baari
Aurustumise time
layers vahel u. 5 minutes
before ülekatmist u. 10 minutes
evaporation time depends temperature and layers arvust
don't lihvige!
1K Plastic Primer may to cover straight:
2K akrüültäiteained.
2K akrüülist pealislakid.
1K aluslakid.
1K paint and alusvärvid
22,50€
ADD TO BASKET
Delivery: home 3-4wd
70,60€
ADD TO BASKET
Delivery: home 3-4wd