plastic headlight restoration polishing kit visbella

this kit helps refresh dusty, yellowish plastic lights (takes less than 5 minutes per bulb). Quickly eliminates surface discoloration, oxidation and scratches. The kit includes all the tools you need to help you update not only car headlights, but also taillights, trailer windows, boats, helmet guards, motorcycle windshields, snowmobiles and more.


preparation
wipe the lamp with a cloth, cover the surface around the lamp with masking paper.


moisten the grinding wheel and attach it to the mounting base. wipe off the yellowing, dimming, fading of the lanterns with sandpaper.

use three-grit sandpaper. start with the coarsest paper and gradually move to the finest: p800 → p1200 → p2000. otherwise, you may irreversibly damage the surface of the lamps.

Warnings:
– do not disturb the order of the irradiation disks!
– do not shine too quickly and / or the lamp in one place (the plastic can heat up and deform)!

polishing
attach the orange cookies to the mounting base, apply polishing paste to the lamp and polish the lamp to its original condition.
Note: If you polish by hand, it is recommended to polish it clockwise, at least 200 revolutions.

protection
clean the lamp. make sure it is dry. park the car so that the headlights are in the shade (make sure the car is not in direct sunlight). using a white sponge, distribute the protective liquid evenly over the entire surface of the lamp. let the guard dry in the shade for 15 minutes. then park the car in direct sunlight. the protective layer dries in 1-2 hours in direct sunlight.

Note: Do not wash the car for 24 hours after applying the protective film to the headlights.

Delivery method