glue Universal polyurethane, yellow, 20ml

Konstruktiivne one-component polüuretaanliim inner- and outdoor for use kodumajapidamistes, in construction and in industry. intended for use places where is these for maximum sidumisjõudu. glue hardens moisture mõjul, increases It's mahtu, täites pores and lüngad, therefore suitable for this excellently sobimatutest materials items for bonding. very good adhesion glue all poorsetele and smooth materials, except PP, PE and PTFE. this Doesn't contain solvents, it Can be used polüstüreeni and õrnade isoleermaterjalide for bonding. shockproof and flexible. due to oma tiksotroopsele konsistentsile no jookse paste vertikaalsetelt surfaces off. this eksponeerib kõrgeimat class Waterproofing D4 according to standard PN-EN 204, big cold endurance and muutuv temperature.

Features:
• durable impacts, pragunemisele
• D4 water resistance class
• vahutab
• fills vabu ruume and lünki
• pole aggressive polüstüreeni in a ratio
• no jookse vertikaalsetelt surfaces off
• frost resistant
• durable muutuvatele temperatuuridele
• durable keemilistele mõjuritele
• no paints aluspinda
• can paint
• glues märjad elements
• inward and outward
• Solvent free

application
materials: wood and puidupõhised materials, stone, krohv, krohv, brick, marmor, graniit, ceramics, glass, metals and their sulamid, aluminium, steel, cast iron, vahtpolüuretaan, polüstüreen,
plastid: PVC, ABS, enamelled aluspinnad

Rakendusnäited:
• aknalaudade, künniste, treppide liimimine
• puitkonstruktsioonide sidumine betoonpindadega
• puusepatoodete liigeste tugevdamine
• fasteners, screws kinnistamine erinevatesse pindadesse
• mitmekihiliste struktuuride liimimine
• damaged hinges repair, for example mööblis

surface making
glued surfaces peaksid be:
• clean
clean glued surfaces nii, et neil no oleks dirt neither saastumist (dust, grease, adhesive stains, rust). glued elements liimimistugevuse for repairing wipe siledate surfaces korral neid lightly sandpaper and then remove dust and wash surfaces thoroughly technical rasvaärastusvahendiga.
• lightly moisture
Liimimistugevuse suurendamiseks you can liimitavaid surfaces little bit with water moisture (10 up to 20 g / m2).

TINGIMUSED
• Ehitusliim eliminates õhust moisture imades, therefore on important, et at least one surface oleks porous or vapor läbilaskev.
• Kahtluse korral viige through kleepumistest.

1. Apply glue for one surface.
o Laotage glue supplied aplikaatori abil apart. be sure that, et glue laotamine no kesta longer than open drying time, st max. 5 min. then peaks glue be veel wet.
2. push glued elements heavily üksteise against and kinnitage these with screw, Carpenters klambrisse, adhesive tape or in a few other võimaliku meetodiga.
3. approximately 2 tunni after you can parandatud items to use, but glue reaches complete tugevuse 24 tunni after.

advice and MÄRKUSED
• Lekkunud liigliimi saab after kõvenemist mechanically to remove or atsetooni or vaseliiniga moistured with cloth to remove.
• connection changes in a few aja after kollaseks - it is loomulik nähtus, this no vähenda mechanical strengths.
• in fixing use kinnitatud kindaid, beacuse glue leaves kauakestvad stains.
• after glue applying clean pipe filament liimist thoroughly and close pipe densely.
• product doesn't stick polyethylene, polüpropüleeni and ptfe mounting.

Technical specifications
bottom: polüuretaanid
Liimivärv: helekollane
Liigeste paint: helekollane
Consistency: tiksotroopne paste
density: 1,12 g / cm3
open time: 5 min.
full kõvenemisaeg: 24 hours
temperature resistance: -30 ° C ÷ 80 ° C

HOIUSTAMINE
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• to protect moisture and from cold.
• glue you can to keep with other toodetega.