glue wood 118ml

gorilla wood glue, pva glue, offers the benefits of an easy-to-use, gorilla-strength water-based glue. it's incredibly waterproof and versatile, making it great for both indoor and outdoor woodworking projects.

product features
quick project execution: requires only 20-30 minutes of fixing time, fully cures in 24 hours.
indoor or outdoor use: passes ansi/hpva type ii waterproofing.
versatile: ideal for hardwood, softwood and natural wood composites.
dries natural color: provides a natural bond.

Application 1
for best results, it is important to prepare the wooden surfaces before applying the glue. for lamination, the surfaces should be planed smooth, leaving the surface of the board free of machine marks, tears and scratches. also be careful not to burn and end the faces. how much gorilla wood glue to apply depends on many factors. generally apply a generous amount of glue to one surface. on difficult-to-glue wooden materials, apply glue to both surfaces. rub together with the other surface to spread the glue evenly on both surfaces. enough glue should be applied to create a fine grain of glue when attached. coverage: 1 gallon of gorilla wood glue covers about 200 square feet. 1 fluid ounce covers about 1.6 square feet.

2. Fastening Many factors determine the technique and type of clamp used: the specific type of joint, the type of stock or sawn material, the moisture content of the material, the room temperature, the installation time and the quality of the surface. generally apply enough pressure that a fine grain of glue will extrude when the correct pressure is applied.

hold time (period of time pressure black be maintained): 20-30 minutes for use at room temperature. temperature black be above 55°f. Please note that setting time may vary depending on temperature, humidity and wood porosity.

curing time (time during which the adhesive reaches full bond strength): 24 hours

3. clean up
clean when the glue is wet: use a clean damp cloth to remove excess glue. Make as many passes as necessary to remove all the glue on a clean area of ​​the cloth. when areas are completely dry, sand as needed. wash hands, skin and wet cloths with soap and warm water, then rinse.

when the glue is dry, clean up: Use a sharp putty knife, razor blade, or sharp scraper to shave the hardened glue off the surface, then sand as needed. soak hands and skin with soap and warm water, wash, then rinse.

bottle tip cleaning: use a clean damp cloth to wipe off excess glue after capping. if the nozzle becomes clogged with dry glue, remove the cap and push the clog back with a toothpick, then rinse the cap with warm water.

To remove gorilla wood glue from your hands, wash them with warm soap and water.

operating temperature - 55° to 75° f, best at room temperature
operating temperature - 0° to 150° f
outside - yes, under the covered area
moisture resistance - waterproof - not recommended for continuous exposure to water
trembling - yes
sandable - yes
swiss - no
waves during treatment - no
weathered color - natural reddish-brown wood color
technical standards - ansi/hpva type ii
storage advice - store at room temperature. wipe excess glue from the spout and keep closed.
filling gaps - no