glue MS-POLIMER 20ml

description
high-quality, clear and Odorless gel, which is based silaaniga modified polümeeridel. this glue ühendab silicones Features due to paindlikkusele and polüuretaanidele big mechanical tugevuse because of. Excellent adhesiveness all ehitusalustega. is used everywhere, where is necessary flexible vuuk and average mechanical strength (5 times bigger kui silicone). MS Polymer glue abil saadud Connections on durable to the vibration and impacts. inner- and outdoor for use at temperatures -50C up to +120C. it is neutral, doesn't damage õrnasid surfaces, does not cause corrosion and it can optionally be also to paint. glue is not many chemicals in a ratio tundlik
- nõrgad happed, alused, lahustid and oils.

- Features:
• flexible
• Odorless
• UV -proof
• durable ilmastikutingimustele
• Waterproof
• durable muutuvatele temperatuuridele
• durable seentele and hallitustele
• aging resistant
• durable nõrkade acids and aluste, solvents and oils lahustele
• no paints aluspinda
• inner- and outdoor for use
• no murene
• no purune
• no jookse vertikaalsetelt surfaces off
• Solvent free
• may to paint

application
materials: glass, mirrors, sanitaarkeraamika, portselan, painted, glasuuritud, enamelled, glasuuritud surfaces, krohv, ehituskeraamika, concrete (sh wet concrete), epoksüalused, Polyester, polüstüreen, hard PVC and samalaadsed plastid, metals and their sulamid (copper, lead, zinc, aluminium etc), steel (zinc plated, stainless, enamelled), liivakivi, graniit, marmor, impregnated wood, cap, MDF, HDF, chipboard jt puidupõhised materials

Rakendusnäited:
• dekoratiivsete elements kleepimine for example fotoraamidele
• decorative- and maskeerimisribade, märkide, handles and embleemide kleepimine
• vitriinakende, vitriinakende, lettide, vitriinide, siltide, tahvlite, reklaampaneelide etc thickening.
• thickening, for example autokülmikud, jahutusloendurid, külmlaod
• boats, laevade, for cars, haagissuvilate thickening
• kodumajapidamistes (kodumasinate, sound- and videoseadmete repair)
• liimimine and thickening transporditööstuses - for example keevisõmblused, vuugid, äärikud, keevisliited
• kivist kitchen töötasapindade kleepimine
• foto kleepimine hauakivi mounting

surface making
glued surfaces peaksid be:
• clean
clean glued surfaces nii, et neil no oleks dirt neither saastumist (dust, grease). then rinse technical rasvaärastusvahendiGA.
• dry
dry cleaned surfaces.

TINGIMUSED
• Working temperature
Make work surrounding and base surface at temperature 5 up to 30 degrees C.

• Liimimine:
1. Apply thin layer MS Polymer glue for one surface and jagage this evenly.
2. push parts together.
o Ühendust you can siiski 5 minutes improve
o Kinnitage connection puusepatööde clamp or raskema eseme abil approximately 2 tunniks.
3. leave 24 tunniks, et vuuk saaks complete tugevuse.
• Veekindlaks tegemine:
1. Kleepige Painting tape glued surface both on side, to ensure ühtlased servad.
2. Apply väike quantity MS Polymeri glue and siluge vette kastetud spaatliga and little bit seepi.
3. remove maskeerimislindid approximately 10 minutes has passed

advice and MÄRKUSED
• items in gluing vertical surfaces valmistage prior front suitable length supports, et objekt glue drying ajal paigal to keep.
• don't use to connect ptfe, PP, PE -ga.
• fresh glue can remove Soap and with water or vaseliiniga and after kõvastumist knife or spaatliga.
• don't niisutage aluspinda neither silikoonikihti with water.

Technical specifications
stand: SMP
sticky paint: clear
Liigese paint: clear
Consistency: tiksotroopne paste
density: 1,04-1,08 g / cm3
Touch dry (23 ° C, 50% moisture): 10 min.
full kõvenemisaeg (23 ° C, moisture) 50%): 3mm / 24h
temperature resistance: -40c -  +90C
Shore A kõvadus: 50-60
100% module: 1,0 Mpa
Tensile Strength: 1,0 Mpa
Pikenemine vaheajal: 55%
Kokkutõmbumine: tühine
Äravool: <2 mm
allowed deformatsioon: 25%
colorable: yes

HOIUSTAMINE
• to keep densely CLOSED anumas at temperature alla 25 ° C.
in transport max. up to -15oC.
• to protect moisture eest.
• glue you can to keep with other toodetega.