Universal kinnitusliim, light brown 100ml

professional neopreenkummist manufactured kinnitusliim, what is used construction- and viimistlusmaterjalide to connect. replaces screws, nails and rivets. perfect for bonding absorbing and mitteimavad materials. it has tiksotroopne Consistency, which is easy to apply and levitada and which no jookse vertikaalsetelt surfaces off. It's biggest advantage on
niinimetatud "fast grip", which võimaldab elements fast ühendamist and big algjõu saavutamist. it is flexible, fills and smoothens base surface small ebatasasused. glue on durable for water, pakasele and muutlikele temperatuuridele -30C up to + 60C, therefore suitable for this perfectly remontimiseks and installing inside rooms inside and outside. glue Can be used also kartmata
sticky polüstüreenist elements, sest this doesn't damage it. after kõvenemist saab vuuki to paint. this Doesn't contain kahjulikku tolueeni and tsükloheksaani.
Features:
• fast grip
• replaces screws, nails, dowels and rivets
• inner- and outdoor for use
• Vuuk no pragune work ajal
• Mitteagressiivne polüstüreeni in a ratio
• no jookse vertikaalsetelt surfaces off
• no paints aluspinda
• Waterproof
• frost resistant
• durable muutuvatele temperatuuridele and UV -radiation
• may to paint
• Tolueenivaba and tsükloheksaanivaba

application
materials: wood and puidupõhised materials, metal, cap, stone, glass, ceramics, puitkiudplaadid, chipboard and kipsplaat, mineraalvill, plastid, polüstüreen, brick, concrete, krohv, vahud, enamelled aluspinnad
Rakendusnäited:
• Aknalaudade, künniste, treppide liimimine
• ceramic tiles liimimine
• handles, riidepuude, infotahvlite kleepimine
• Isolatsiooniplaatide liimimine polüstüreenist, villast
• Ukseraami and põrandaliistude fixing
• Liimikinnitus, chimney- and korkplaadid
• Mosaiik-, parkett- and kivipindade liimimine
• metal liimimine concrete, gypsum, plaster, plasterboard and other porous aluspindadega
• Heliisolatsioonielementide installation
• switches, handles and PVC -kaablikatete fixing

surface making
glued surfaces peaksid be:
• clean
clean glued surfaces nii, et neil no oleks dirt neither saastumist (dust, grease). glued elements liimimistugevuse for repairing rub neid lightly sandpaper, then remove thoroughly from dust and rinse technical rasvaärastusvahendiga.
• dry
dry cleaned surfaces.
TINGIMUSED
• dry and warm environment speeds up, at the same time kui low temperature slows down solvent evaporation (comfortable temperature on over 18oC).

1. Apply glue for one ühendatavale surface.
o Apply glue punktide or vertikaalsete triipude kujul.
2. push glued elements heavily üksteise against and rebige then heavily ära.
3. wait up to 3 minutes.
o this time enough solvent osaliseks aurustamiseks at room temperature. glue peaks be katsudes dry.
4. after it time push glued elements together.
o Koputage suuremaid elemente rubber vasaraga, nii et surfaces kleepuksid üksteisega evenly.
o Kui liimite suuremaid elemente vertically, you can these additionally to fix supported.
5. leave 12 tunniks, et vuuk saaks complete tugevuse.

advice and MÄRKUSED
• wash tools and värskeid stains lahustiga (for example petrol). before using Check surface durability for solvents. remove kuivatatud glue mechanically.
• product doesn't stick polyethylene, polüpropüleeni and ptfe mounting.
• Tagage piisav ventilation liimimise and solvent aurustamisega connected tegevuste ajal.

Technical specifications
bottom: SBS rubber
sticky paint: helepruun
connections paint: helepruun
Consistency: very viskoosne fluid
density: 1,2 - 1,3 g / cm3
open time: 5 min.
full kõvenemisaeg: 12 hours
temperature resistance: -30 ° C ÷ 60 ° C

HOIUSTAMINE
• to keep densely CLOSED anumas at temperature 5 ° C up to 25 ° C.
• to protect moisture and from cold.
• glue you can to keep with other toodetega.