mannol 9829 ceramo ester oil additive 250ml

new engine protection agent based on synthetic ethers - esters (group v oils) and hexagonal boron nitride microparticles h-bn (white graphite) - anti-wear and anti-friction additive for engine oils without oil sump clutches (friction clutches). suitable for all types of engines - diesel and gasoline, four-stroke and two-stroke, and for all types of oils - mineral, semi-synthetic, synthetic, including those containing ether (esters). ideal product for tuning and high performance cars.
it is a stable suspension of graphite-like micropowder in ether.
due to their different polarity, the ether molecules in the additive bind magnetically to the metal surfaces and form a dense and very stable oil film, while the ceramic microparticles smooth out the unevenness on the friction surfaces and dissipate heat effectively. it prevents direct contact of metal surfaces and wear of individual parts even under the most demanding operating conditions. during cold starts, especially at sub-zero temperatures, dry friction is avoided, thus minimizing wear when starting the engine.
the boundary layer formed when the product is applied has the following properties:
- resistance to extreme pressure - allows the engine and/or gearbox to work at increased loads without negative consequences;
- excellent anti-wear and anti-friction properties that significantly extend the life of the engine and/or transmission unit and significantly reduce fuel consumption and engine noise;
- anti-corrosion and antioxidant properties.


the additive gives the oil the following properties:
- prevents dry friction;
- reduces evaporation, reduces CO2 emission and extends the service life of the oil;
- improves thermal oxidative stability, which increases resistance to aging and wear and thereby extends oil change intervals;
- improves low temperature properties, making cold start much easier;
- improves the properties of the detergent and dispersion, preventing the deposition of varnish, resins and sludge, which extends the life of the engine and/or gearbox and the oil.
compatibility:
- compatible with all materials, particles and the finest oil filters (for fine filtration): the size of the particles (no more than 0.5 μm) ensures their free passage through all filters and prevents sedimentation;
- Compatible with all injection systems, including catalytic converters, all types of turbochargers and manifolds.


use: shake and add to the oil at the rate of 300 ml per 5 l.
attention! not suitable for use in equipment with an oil bath clutch (friction clutches).