glue glass /0.31L

windshield RTV sealant on one-component polüuretaanliim-tihendaja tuuleklaaside for pasting, where elevated ohutusgarantii no nõuta. it is used front-, rear- and küljeakende for fixing passenger cars, vans, raudteetranspordi and eriotstarbeliste vehicles body. best results will be achieved õhkrelva when using.
corresponds to Loctite TEROSON PU 8597 HMLC requirements (specification).
minimum valmisolekuaeg on 1 hour after applying according to FMVSS-ile (USA) and 4 hours according to most rangemale European kokkupõrketesti standard.

Features:
- suitable for to apply any material, sh aluminium, windshield avausele;
- due to high algkõvadusele and exceptional tugevatele sidumisomadustele is not needed glass täiendavat fikseerimist;
- very good durability longusele;
- no "ulatu" tools järele;
- big polümerisatsiooni speed;
- high nihketugevus and high nihkemoodul. good elasticity also after long using;
- very low elektrijuhtivus;
- good nake old liimvuugi jääkmaterjalidega;
- high durability UV-radiation;
- Excellent adhesiveness to the glass, ceramic coating to the glass and painted surfaces;
- high European ohutusstandard.

application:
clean Bonding surfaces thoroughly from old liimist, paint and muudest kattekihtidest, rust, dirt, from grease and õliladestustest. Rasvatage windshield hole surface maandumiskohas, by using 9691 MANNOL Brake Cleaner. dry. be sure that, et glass surface no oleks damages neither defects. surface for cleaning and optimal nakkuvuse to achieve is recommended klaasiliimimisjoon soft abrasiivse materials lihvida. after grinding clean Bonding surfaces 9974 MANNOL klaasipuhastusvahendiga and let the cleaner 2 minutes to dry. from grease remove glass surface, by using 9691 MANNOL Brake Cleaner. dry. Kuumutage Cassette 15 minutes up to a temperature 50–80 °C. big glass puhul It is recommended eelsoojendada also other kassetti. Apply thin layer glue glass nakkekohtadele. glue on allowed apply not to the glass, only It's maandumiskohale body oleva windshield to the hole. has been applied it is necessary alustada glass alumisest servast steady layer without katkestusteta longitudinal kontuuri and without vahedeta liimikihi and glass vahel. install glass to the hole. push lightly. glass stays reguleeritavaks 15 minutes. It is recommended on to fix adhesive tape and then let to dry. glue full polümerisatsioon and full kõvenemine happens 24 hours. car suitable for sõitmiseks 1 tunni after, but to avoid glass nihkumist, which may later cause liigseid sisepingeid and then cracks, is recommended car praegu not to use. car self black be tasasel surface. Liimimine it is is recommended to perform at room temperature and õhuniiskusel 50-60%.