SIKA glue windshield for assembly SikaTack Drive 60 300ml, drying time 1 hours black

SikaTack® DRIVE (60 min) car windshield installing liik
car windshield assembly  meister
SikaTack® DRIVE (60 min) on car glass mounting adhesive, which has great pealekandmisomadused. this offers 60 -minutilist minimaalset väljasõiduaega (MDAT). it on tested according to FMVSS 212 95.

60 minutes minimum väljasõidu time, according to FMVSS 212, by using 95. protsentiili kokkupõrkekatset test nukkudest juhtidega.
Supports fast and strong ADAS -i kalibreerimist
compatible all car models due to Sika all-in one moodulitehnoloogiale

TOOTEEELISED
60 minutes minimum väljasõidu time, according to FMVSS 212, by using 95. protsentiili kokkupõrkekatse mannekeene
Supports fast and strong ADAS -i kalibreerimist
compatible all car models due to Sika all-in one moodulitehnoloogiale
compatible Black-Primerless and All Black installiprotsessidega
for cars OEM -quality
 
use
SikaTack® DRIVE (60 min) suitable for only kogenud users.
this product and with this connected protsessiteave is intended for car glass for changing. other rakenduste puhul black nakkumise and materials ühilduvuse to ensure teha katseid tegelike aluspindade and tingimustega.


typical tooteandmed
chemical stand 1-component polyurethane
paint (CQP001-1) black
Kuivamismehhanism Niiskue poolt kuivatav
density (kõvastumata) 1,3 kg/l
Mittesõltuvad Features Excellent
operating temperature:
product 5 ─ 35 ° C
ümbritsev temperature 5 ─ 35 ° C
Nahaaeg (CQP019-1) 15 minutes A
open time (CQP526-1) 10 minutes A
Kuivamiskiirus (CQP049-1) look diagrammi 1
Shore A kõvadus (CQP023-1 / ISO 7619-1) 60
Tensile Strength (CQP036-1 / ISO 527) 7 MPa
extension murdumisel (CQP036-1 / ISO 527) 300 %
Rebenemiskindlus (CQP045-1 / ISO 34) 10 N / mm
Tensile Strength (CQP046-1 / ISO 4587) 4 MPa
minimum väljasõiduaeg (cars) according to FMVSS 212 (CQP511-1) with air bag 60 minutes B/C
Isolatsioonitakistus (CQP079-2 / DIN IEC 60167) low juhtivus

Rakendusteave
surface ettevalmistamine
surfaces black be clean, dry and rasvadest, from oil, from dust and saasteainetest vabad.
Liimipindu black käsitleda according to Sika Black-Primerless or All Black paigaldusprotsessile. Lisateavet eeltöötluste rakendamise and using spaces leiate according to tootelehelt.
without cheramic kateteta esiklaasid these proper UV -protection.
 
application
recommended on to implement SikaTack® DRIVE (60 min) patareitoitel or air jõul töötava piston-type rakenduspüstoliga.
Mõelge viscosity suurenemisele low at temperature. Liimimise hõlbustamiseks black glue before using toatemperatuurile viia.
steady thickness to ensure is recommended glue apply kolmnurkse helme kujul (vt joonis 1).

01-triangular helmes

Joonis 1: recommended helmeste konfiguratsioon

Kuumas and niiskes kliimas on open time significantly lühem. glass black always to install open aja jooksul. don't ever install glass after Product leather moodustumist.

removal
Kuivatamata SikaTack® DRIVE (60 min) saab tööriistadelt and seadmetelt to remove Sika® Remover-208 or in a few other suitable lahustiga. after kõvenemist saab material to remove only mechanically. hands and paljastatud leather black immediately pesta, by using käterätikuid, like Sika® Cleaner-350H or sobivat tööstuslikku kätepuhastusvahendit and water. don't use solvents on lether!