Stone protection + weld seam sealant troton black 1l
Goods available only in e-shop
14,90€
Delivery: home 3-4wd
ADD TO BASKET
2-in-1 Stone protection + weld seam sealant 2 in 1 Anti Gravel & Seam Sealant
PRODUCT DESCRIPTION
A product based on rubbers and resins, designed to protect the car body from mechanical damage, rust and atmospheric effects, as well as sealing seams using an anti-gravel gun.
Has noise-absorbing properties.
Can be covered with all types of painting materials.
PHYSICAL-CHEMICAL PROPERTIES
Color: black
Density*: 1.21 - 1.25 kg/l
Volume: 1 l
Output: ok. at 0.7 kg/m2 ± 600 µm
Temperature resistance: -25°C to 80°C
Brookfield Adhesion*: 4250 m.Pa.s
Not sticky*: approx. 45 minutes (± 700 μ)
Total hardness*: approx. 3.5 hours at temperature (± 700 µ)
*at a temperature of ±20°C and a relative humidity of 65%
ORGANIC VOLATILE CONTENT
VOC = 559.4 g/l
SURFACES AND APPLICATIONS
Stone protection coating:
- The surface to be covered must be clean, dry, dust-free, degreased and rust-free.
- Shake well before use.
- Apply with a gun at a pressure of 3 ÷ 6 bar.
- The optimal application distance is 30 cm.
- If it is necessary to get a thicker layer, it is recommended to dry the previous layer.
- Contaminated surfaces must be cleaned with solvent or gasoline.
- Depending on the final thickness of the coating, after 60 ÷ 90 minutes, the grout can be covered with acrylic 2K varnishes or base paints.
- Before applying two-component varnishes, the surface must be primed according to the varnish manufacturer's recommendations.
Seam sealing:
- The surface to be covered must be clean, dry, dust-free, degreased and rust-free.
- Shake well before use.
- The grout is applied with a gravel gun at a pressure of 2 ÷ 4 bar.
- The optimal application distance is 1 ÷ 2 cm.
- If it is necessary to get a thicker layer, it is recommended to dry the previous layer.
- Contaminated surfaces must be cleaned with solvent or gasoline.
- Depending on the final thickness of the coating, after 60 ÷ 90 minutes, the grout can be covered with acrylic 2K varnishes or base paints.
- Before applying two-component varnishes, the surface must be primed according to the varnish manufacturer's recommendations.
Drying time*:
- not sticky: ok. 45 min. at a layer thickness of ± 700 μ
- total hardness: approx. 3.5 hours at a layer thickness of ± 700 µ
*at a temperature of 20°C and a relative humidity of 65%.
PRODUCT DESCRIPTION
A product based on rubbers and resins, designed to protect the car body from mechanical damage, rust and atmospheric effects, as well as sealing seams using an anti-gravel gun.
Has noise-absorbing properties.
Can be covered with all types of painting materials.
PHYSICAL-CHEMICAL PROPERTIES
Color: black
Density*: 1.21 - 1.25 kg/l
Volume: 1 l
Output: ok. at 0.7 kg/m2 ± 600 µm
Temperature resistance: -25°C to 80°C
Brookfield Adhesion*: 4250 m.Pa.s
Not sticky*: approx. 45 minutes (± 700 μ)
Total hardness*: approx. 3.5 hours at temperature (± 700 µ)
*at a temperature of ±20°C and a relative humidity of 65%
ORGANIC VOLATILE CONTENT
VOC = 559.4 g/l
SURFACES AND APPLICATIONS
Stone protection coating:
- The surface to be covered must be clean, dry, dust-free, degreased and rust-free.
- Shake well before use.
- Apply with a gun at a pressure of 3 ÷ 6 bar.
- The optimal application distance is 30 cm.
- If it is necessary to get a thicker layer, it is recommended to dry the previous layer.
- Contaminated surfaces must be cleaned with solvent or gasoline.
- Depending on the final thickness of the coating, after 60 ÷ 90 minutes, the grout can be covered with acrylic 2K varnishes or base paints.
- Before applying two-component varnishes, the surface must be primed according to the varnish manufacturer's recommendations.
Seam sealing:
- The surface to be covered must be clean, dry, dust-free, degreased and rust-free.
- Shake well before use.
- The grout is applied with a gravel gun at a pressure of 2 ÷ 4 bar.
- The optimal application distance is 1 ÷ 2 cm.
- If it is necessary to get a thicker layer, it is recommended to dry the previous layer.
- Contaminated surfaces must be cleaned with solvent or gasoline.
- Depending on the final thickness of the coating, after 60 ÷ 90 minutes, the grout can be covered with acrylic 2K varnishes or base paints.
- Before applying two-component varnishes, the surface must be primed according to the varnish manufacturer's recommendations.
Drying time*:
- not sticky: ok. 45 min. at a layer thickness of ± 700 μ
- total hardness: approx. 3.5 hours at a layer thickness of ± 700 µ
*at a temperature of 20°C and a relative humidity of 65%.
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
