smoke alternator for detecting leaks on a car sdt 101

AUTOOL SDT101 car smoke detector machine for EVAP system

AUTOOL SDT101 automotive industry Smoke Detector Machine is a special automotive EVAP system pipe leak detection tool, which can quickly and accurately find out whether the failure is caused by pipe leakage, even the smallest leaks can be detected.
The AUTOOL SDT101 smoke detector provides the standard 32 bar test pressure required for automotive EVAP systems by precisely adjusting the pressure from an external air source. It can quickly release smoke in less than ten seconds, greatly improving your work efficiency. It is one of the essential maintenance and inspection tools in your workshop.
Warm tips
When using this AUTOOL SDT 101 car smoke leak detector for the first time, fill it with 20ml of oil. Be careful NOT to exceed this range.
This smoker does not have a built-in air pump. It requires the connection of an additional air compressor.
Testing fluid: Both liquid paraffin and baby oil are fine.
Fresh oil can only be poured when the smoke becomes thin and it black not be filled more than 20 ml each time.
Before adding fresh oil, pour out the remaining oil from the detector and change the detector oil regularly.
Stay away from smoke-sensitive parts while detecting a leak.
Do not operate the detector continuously for more than 8 minutes. It needs interval rest.
The detector has intelligent protection, when it exceeds the working limit, such as over 75℃, it will automatically turn off the power. In this case, use it later.
The round part of this detector is temperature sensitive, be careful to avoid burns.

Features of the AUTOOL SDT101 smoke detector machine
Rapid smoke release: smoke release within ten seconds, greatly improving the efficiency of your test.
Compact and portable design: most smoke detectors on the market are large in size and not easy to transport and store. Autool designed this smoke detector to help you solve this problem, not only small size and light weight. , but also easy to carry. The handle design and cone adapter, airbag adapter, etc. can be adapted to most air inlets, which is an indispensable tool for you.
Protection against overheating and freezing: Autool SDT101 smoke detector is equipped with the latest intelligent protection devices. When the temperature exceeds 75℃, the protection device only activates the power supply and shuts it down to protect the operator and equipment. It is not only protected against high temperatures, but also suitable for low temperature use.
No air pump: Connect shop air supply, connect 12V vehicle power, inject working air into the AUTOOL SDT103 fuel leak tester, turn the flow dial counterclockwise to open the air flow, turn on the power on the back of the device, then AUTOOL. automotive industry SDT103 smoke machine starts to produce smoke.
Wide range of applications: AUTOOL SDT101 smoke leak detector is suitable for detecting leaks in cars, motorcycles, snowmobiles, ATVs, ATVs, light trucks and speedboats, suitable for all models (only for 12v DC).
3-year warranty: In case of damage caused by non-human factors, we promise to reissue the parts for free within 3 years.
How to use smoke detector AUTOOL SDT101?
Step 1: Fill the detector with 20ml of baby oil for the first time. Open the engine cover and hang the detector inside the cover.
Step 2: Disconnect the tube that needs to be connected to the detector.
Step 3: Connect the sensor to the DC12V battery, turn on the power switch, and the detector will start working.
Step 4: After about 30 seconds, the pipe will fill with smoke. Check for leaks. Use a headlamp if necessary.