Semi-automatic welding midi mig 220 230v, migomat
$326,70
Arrives in 3-4wd
ADD TO BASKET
Available 2pc. Description
The Midi Mig 220 welder has a single-phase power supply and is made according to IGBT inverter technology. This product is intended for FLUX welding (without gas shield), MIG/MAG method (with gas shield) and for welding with direct current (DC) coated electrodes. The Midi Mig 220 semi-automatic welding machine has been designed for welding with 0.9 mm self-shielded wires, welding wires with a diameter of 0.6-1.0 mm, as well as coated electrodes with a diameter of up to 4 mm.
Midi Mig 220 welding machine – many possibilities in one device
The Midi Mig 220 semi-automatic welding machine supports a 5kg D200 spool and is designed for welding aluminum, cast iron, low-alloy steel (MAG), low-carbon steel and alloy steel (MIG). Due to the fact that it is a product created in accordance with modern technology, it also has many useful functions and additions, such as:
– two digital displays of welding current parameters (voltmeter, ammeter)
– LED signaling diodes: power supply (green) and overload (red)
– electronically controlled smooth adjustment of the welding current
– electronically controlled smooth adjustment of the wire feed speed
– fast wire feed button
– Euro connector
– protection against overload.
The Midi Mig 220 welder was created for work both in the workshop and in the field, and at the same time belongs to a group of products that are effective in their operation and very durable. The Midi Mig 220 semi-automatic welding machine is one of the best solutions in terms of efficiency and reliability.
Equipment
The standard equipment includes:
– MB 15 welding torch 3 m
– 2.5 m welding cable with electrode holder 200A (DX25)
– 2 m ground cable with 200A clamp (DX25)
– 2 m power cable with 230V plug
– 230V socket on the rear panel
– connector for an 8 mm hose for connecting a gas pipe
- a welding shield
- a brush
Technical data
Code 103 111
Device type MIDI MIG 220
Supply voltage [V] 230
No-load current voltage [V] 56
Welding current adjustment range [A] MIG – 15-220
MMA 20-180
Maximum efficiency at 40°C
EN 60974-1 220A@60%
170@100%
Wire diameter [mm] 0.6-1.0
Max spool weight [kg] 5
Protection class [IP] IP21
Dimensions [cm] 54x24x42
Weight [kg] 14
The Midi Mig 220 welder has a single-phase power supply and is made according to IGBT inverter technology. This product is intended for FLUX welding (without gas shield), MIG/MAG method (with gas shield) and for welding with direct current (DC) coated electrodes. The Midi Mig 220 semi-automatic welding machine has been designed for welding with 0.9 mm self-shielded wires, welding wires with a diameter of 0.6-1.0 mm, as well as coated electrodes with a diameter of up to 4 mm.
Midi Mig 220 welding machine – many possibilities in one device
The Midi Mig 220 semi-automatic welding machine supports a 5kg D200 spool and is designed for welding aluminum, cast iron, low-alloy steel (MAG), low-carbon steel and alloy steel (MIG). Due to the fact that it is a product created in accordance with modern technology, it also has many useful functions and additions, such as:
– two digital displays of welding current parameters (voltmeter, ammeter)
– LED signaling diodes: power supply (green) and overload (red)
– electronically controlled smooth adjustment of the welding current
– electronically controlled smooth adjustment of the wire feed speed
– fast wire feed button
– Euro connector
– protection against overload.
The Midi Mig 220 welder was created for work both in the workshop and in the field, and at the same time belongs to a group of products that are effective in their operation and very durable. The Midi Mig 220 semi-automatic welding machine is one of the best solutions in terms of efficiency and reliability.
Equipment
The standard equipment includes:
– MB 15 welding torch 3 m
– 2.5 m welding cable with electrode holder 200A (DX25)
– 2 m ground cable with 200A clamp (DX25)
– 2 m power cable with 230V plug
– 230V socket on the rear panel
– connector for an 8 mm hose for connecting a gas pipe
- a welding shield
- a brush
Technical data
Code 103 111
Device type MIDI MIG 220
Supply voltage [V] 230
No-load current voltage [V] 56
Welding current adjustment range [A] MIG – 15-220
MMA 20-180
Maximum efficiency at 40°C
EN 60974-1 220A@60%
170@100%
Wire diameter [mm] 0.6-1.0
Max spool weight [kg] 5
Protection class [IP] IP21
Dimensions [cm] 54x24x42
Weight [kg] 14
Delivery method
DHL Express
Fast Delivery (Shipping discount for order starting from 700 € or $)
Fast Delivery (Shipping discount for order starting from 700 € or $)
$90,10
Delivery date 2025-06-12
Postal office
To the nearest Postal office
To the nearest Postal office
$110,50
Delivery date 2025-06-25
Courier International
To Home or Office (Shipping discount for order starting from 700 € or $)
To Home or Office (Shipping discount for order starting from 700 € or $)
$129,80
Delivery date 2025-06-25
$784,80
ADD TO BASKET
Arrives in 3-4wd
$784,80
ADD TO BASKET
Arrives in 3-4wd
$727,90
$1.357,10
-47%
ADD TO BASKET
Arrives in 3-4wd
$578,70
ADD TO BASKET
Arrives in 3-4wd
Which hand tool steel is the most durable?
As we all know, different steels are used to make different hand tools. The properties and strength of the steels are given below.
... More...
The data shown here, especially the complete database of car spare parts, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted. 
