inverter semi-automatic welding tecno mig 234 pulse 4x4

Available 1pc. Professional semi-automatic inverter welding device for MIG-MAG, MIG PULS, FLUX and MMA welding with covered electrode. Welding current 200A. Power supply 230V. The diameter of the welding wire is 0.8-1.2mm. 4-roll wire feeder
TECNO MIG 234 PULSE 4x4 is an inverter - synergic semi-automatic welding device designed for arc welding using the MIG/MAG, MMA, TIG Lift method. The device is intended for professional use.

The device has three synergic MIG/MAG welding modes: MIG, MIG PULSE, double PULSE MIG.

TECNO MIG 234 PULSE has synergistic programs for welding aluminum and its alloys, stainless steel, carbon and low-alloy steels. It also allows welding of galvanized steel (settings in manual mode). Welding is performed in an inert gas, active gas or mixture shield, depending on the program selected on the control panel.

Thanks to the use of MIG pulsation, the controlled amount of heat of the welded element increases. Regardless of the welding position, it is possible to obtain a better weld and reduce the amount of spatter.

For both MIG and MIG PULS method, we can select the function of the button on the handle in spot mode (spot welding), 2-step, S2-step, 4-step (button lock for long welds),

Using a 4-roll feeder, the device ensures a stable wire feed, which is important when welding aluminum, and copes very well with 5-meter welding torches.

A clear and easy-to-use digital control panel allows precise adjustment of MIG welding parameters such as:

dual pulse peak/base current control
inductance adjustment (MIG / double Impulse)
pulse amplitude adjustment in double pulse
pulse width (fill) control with double pulse
pulsation frequency control in double pulse
adjustment of spot welding time
adjustment of the burning time of the wire after welding
adjusting the gas flow time before welding
adjustment of gas flow time after welding
The device also has precise adjustment of MMA parameters, such as:

ARC FORCE (MMA) regulation
HOT START (MMA) current regulation
Physical parameters
The device has a fan cooling system, which significantly increases its efficiency.

The device is equipped with overload protection, which increases its reliability.

Power parameters
Single-phase 230V power supply

The device is equipped with a power plug.

Equipment
The delivery includes a set of 3-meter aluminum-armed professional welding torch MIG 24, 2-meter electrode cable, 2-meter ground cable, feed rollers 1.0-1.2 for aluminum and 0.8-1.0 for steel.


Mains protection C25A
Nominal supply voltage 230V, 50-60Hz, 1ph
Power 6.53 kW
Maximum current 200 A
Operating current 100% 160 A
Operating current 60% 200 A
Diameter of aluminum wire 1.0 - 1.2 mm
The diameter of the self-shielding wire is 0.8 mm
Steel wire diameter 0.8 - 1.0 mm
Stainless steel wire diameter 0.8 - 1.0 mm
The diameter of the welding electrode is 1.6 - 4.0 mm
Welding current adjustment range 20-200 A
Wire spool size D100 (0.45 kg and 1 kg), D200 (2 kg and 5 kg)
Security level IP23S
The weight of the device/set is 15/16 kg
Overall dimensions: length x width x height 510x230x370 mm
Package dimensions: length x width x height 550x250x385 mm