sander eccentric 450w 150mm 230v

Application paints, varnishes, rust, putty, wood
Specify the contents of the sander, dust bag
Revolutions 4000-13000 min⁻¹
Weight 2.4 kg
Voltage 220-240V ac
Power 450W
Security level IPX0
Frequency 50/60 Hz
Electrical insulation class II
Sound pressure 82.0 ± 3.0 dB(A)
Acoustic power 90.0 ± 3.0 dB(A)
Electronically adjustable rotation speed Yes
Vibrations 12.5 ± 1.5 m/s²
The diameter of the sandpaper discs is 150 mm
Eccentricity 2 mm

Eccentric sander 450w 150mm for removing rust, putty and paint from metal, wood 4000-13000 rpm

The eccentric sander is designed for sanding and smoothing wooden surfaces, paint coatings and fillers.

The tool can be used in a variety of ways thanks to the disk adapted to attach sandpaper with different grits.

The grinder comes with a bag for collecting dust generated during work.

Additional information:

High-power sander (450 W) with variable speed is the optimal combination for working with wood, removing rust and paint coatings
A plate with a diameter of 150 mm allows you to get a smooth surface and, for example, quickly clean a wooden structure from peeling old paint
the bearing supporting the drive shaft is embedded in a metal housing, which prevents deformations caused by high temperatures inside the sander
the adjustable auxiliary handle located at the front of the housing ensures stable pressure of the machine and makes grinding comfortable for the user
The 3 m long rubber cable is soft and does not limit the operation of the device
the upper part of the grinder is covered with a rubber lining
Smooth speed control ensures that the work pace is adjusted to the user's requirements and comfort
the device has a connector for use with a vacuum cleaner
Parameters:

nominal voltage [V~]: 220-240
nominal frequency [Hz]: 50/60
nominal power [W]: 450
nominal speed [min-1]: 4000-13000
Grinding wheel size [mm]: 150
weight [kg]: 2.4
insulation class: II
protection level: IPX0
Velcro fastening

Thanks to the Velcro attachment, the grinder disc allows you to easily and quickly change the sandpaper.

Speed ​​setting



The grinder has a switch that can be used to control the speed of the grinder. The deeper the switch is pressed, the higher the speed of the sander.

The switch button allows you to set the depth of the switch press and thus the rotation speed.

Arrows and symbols above the button indicate the direction of rotation to increase speed (+ symbol) or decrease speed (- symbol).

Additional handle

The grinder has an adjustable additional handle, the position of which can be quickly changed without additional tools. To do this, simply unscrew the locking screw, adjust the handle to the desired position and then lock the handle with the screw.

Dust collection bag

the sander is equipped with a bag that allows you to collect dust generated during work. The bag must be installed in the dust extraction hole by inserting the bag connection into the dust extraction hole of the sander.

Instead of a bag, the sander can be connected to an external dust removal system, e.g. using an industrial vacuum cleaner.