Invertertehnoloogiaga Plasma cutter 21, GYS cutting up to 6mm 230V 5-20a
Goods available only in e-shop
759,90€
915,80€
-18%
Delivery: home 3-4wd
ADD TO BASKET
Available 2pc. for cutting up to 6 mm
one phase 230V (+/- 15%)
easy to use and easy suruõhusüsteemiga to connect.
burner: 4 m with ohutuslülitiga, et prevent juhuslikku starting.
reinforced protection for use generaatoritega and permanent overvoltage eest up to 400V (tehases tested)
IP23 (kaitstud rain / dust eest): perfect outdoor applications.
Ümmarguseks for cutting up to 134 cm diameter.
set of 3 telge: magnetiline / end / kruvimiseks
steel: max 6 mm
aluminium: max 4 mm
(speed = 15 cm /min 20A at)
Invertertehnoloogiaga plasmalõikur.
Plasmalõikur 21 suitable for perfectly hooldustöödeks and car body for repair.
HF Start missing
Pilot Arc system algab curve without keevituslehega kontaktis olemata . without kõrgsageduseta starting prevents elektromagnetilisi häireid (radio, computers, phones, meditsiiniseadmed etc)
strong and reinforced disainiga CUTTER 21 suitable for:
industrial for use and many nõudlikele keskkondadele, which allow very kvaliteetset lõikamist even painted on surfaces:
cuts up to 6 mm terast, stainless terast and malmi.
cuts up to 4 mm for aluminum and vaske.
very täpnevõimaldab to cut 0,6 mm metalllehed low intensiivsusega without moonutusteta.
high-quality cutting without moonutusteta
easy to use, fast and safe
230V 50/60Hz
16A protection
EN60974-1
Max pressure 2,4-4bar
inner Air compressor missing
dimesions 17x43x26cm
weight 10,4kg
suitable for together generaatoriga 4,1kw / 5,9kva
additional information
one phase 230V (+/- 15%)
easy to use and easy suruõhusüsteemiga to connect.
burner: 4 m with ohutuslülitiga, et prevent juhuslikku starting.
reinforced protection for use generaatoritega and permanent overvoltage eest up to 400V (tehases tested)
IP23 (kaitstud rain / dust eest): perfect outdoor applications.
Ümmarguseks for cutting up to 134 cm diameter.
set of 3 telge: magnetiline / end / kruvimiseks
steel: max 6 mm
aluminium: max 4 mm
(speed = 15 cm /min 20A at)
Invertertehnoloogiaga plasmalõikur.
Plasmalõikur 21 suitable for perfectly hooldustöödeks and car body for repair.
HF Start missing
Pilot Arc system algab curve without keevituslehega kontaktis olemata . without kõrgsageduseta starting prevents elektromagnetilisi häireid (radio, computers, phones, meditsiiniseadmed etc)
strong and reinforced disainiga CUTTER 21 suitable for:
industrial for use and many nõudlikele keskkondadele, which allow very kvaliteetset lõikamist even painted on surfaces:
cuts up to 6 mm terast, stainless terast and malmi.
cuts up to 4 mm for aluminum and vaske.
very täpnevõimaldab to cut 0,6 mm metalllehed low intensiivsusega without moonutusteta.
high-quality cutting without moonutusteta
easy to use, fast and safe
230V 50/60Hz
16A protection
EN60974-1
Max pressure 2,4-4bar
inner Air compressor missing
dimesions 17x43x26cm
weight 10,4kg
suitable for together generaatoriga 4,1kw / 5,9kva
additional information
494,80€
ADD TO BASKET
Delivery: home 3-4wd
873,60€
ADD TO BASKET
Delivery: home 3-4wd
941,90€
ADD TO BASKET
Delivery: home 3-4wd